The Asia Better Technology (ABT) Y030XX067A panel is a 3.0" 320x480 24-bit IPS LCD panel. Its particularity is that it has non-square pixels (as it is 4:3 for a resolution of 320x480), and that it requires odd lines to be sent as RGB and even lines to be sent as GRB on its 8-bit bus. Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> --- .../display/panel/abt,y030xx067a.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml new file mode 100644 index 000000000000..6407e8bf45fa --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel + +description: | + The panel must obey the rules for a SPI slave device as specified in + spi/spi-controller.yaml + +maintainers: + - Paul Cercueil <paul@xxxxxxxxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: abt,y030xx067a + + backlight: true + port: true + power-supply: true + reg: true + reset-gpios: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "abt,y030xx067a"; + reg = <0>; + + spi-max-frequency = <3125000>; + + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; -- 2.28.0
