On Fri, Oct 30, 2020 at 05:12:52PM +0800, Yong Wu wrote:
> Convert MediaTek SMI to DT schema.
>
> CC: Fabien Parent <fparent@xxxxxxxxxxxx>
> CC: Ming-Fan Chen <ming-fan.chen@xxxxxxxxxxxx>
> CC: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> ---
> .../mediatek,smi-common.txt | 50 -------
> .../mediatek,smi-common.yaml | 140 ++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 50 -------
> .../memory-controllers/mediatek,smi-larb.yaml | 129 ++++++++++++++++
> 4 files changed, 269 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+Cc Honghui Zhang,
Your Ack is needed as you contributed descriptions to the bindings and
work is being relicensed to GPL-2.0-only OR BSD-2-Clause.
Best regards,
Krzysztof
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> delete mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> deleted file mode 100644
> index dbafffe3f41e..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Common
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Mediatek SMI have two generations of HW architecture, here is the list
> -which generation the SoCs use:
> -generation 1: mt2701 and mt7623.
> -generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> -
> -There's slight differences between the two SMI, for generation 2, the
> -register which control the iommu port is at each larb's register base. But
> -for generation 1, the register is at smi ao base(smi always on register
> -base). Besides that, the smi async clock should be prepared and enabled for
> -SMI generation 1 to transform the smi clock into emi clock domain, but that is
> -not needed for SMI generation 2.
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-common"
> - "mediatek,mt2712-smi-common"
> - "mediatek,mt6779-smi-common"
> - "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
> - "mediatek,mt8167-smi-common"
> - "mediatek,mt8173-smi-common"
> - "mediatek,mt8183-smi-common"
> -- reg : the register and size of the SMI block.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
> - for generation 2 smi HW as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - They may be the same if both source clocks are the same.
> - - "async" : asynchronous clock, it help transform the smi clock into the emi
> - clock domain, this clock is only needed by generation 1 smi HW.
> - and these 2 option clocks for generation 2 smi HW:
> - - "gals0": the path0 clock of GALS(Global Async Local Sync).
> - - "gals1": the path1 clock of GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt6779 and mt8183.
> -
> -Example:
> - smi_common: smi@14022000 {
> - compatible = "mediatek,mt8173-smi-common";
> - reg = <0 0x14022000 0 0x1000>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> - clocks = <&mmsys CLK_MM_SMI_COMMON>,
> - <&mmsys CLK_MM_SMI_COMMON>;
> - clock-names = "apb", "smi";
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> new file mode 100644
> index 000000000000..e050a0c2aed6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Common
> +
> +maintainers:
> + - Yong Wu <yong.wu@xxxxxxxxxxxx>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> + MediaTek SMI have two generations of HW architecture, here is the list
> + which generation the SoCs use:
> + generation 1: mt2701 and mt7623.
> + generation 2: mt2712, mt6779, mt8167, mt8173 and mt8183.
> +
> + There's slight differences between the two SMI, for generation 2, the
> + register which control the iommu port is at each larb's register base. But
> + for generation 1, the register is at smi ao base(smi always on register
> + base). Besides that, the smi async clock should be prepared and enabled for
> + SMI generation 1 to transform the smi clock into emi clock domain, but that is
> + not needed for SMI generation 2.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-common
> + - mediatek,mt2712-smi-common
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8167-smi-common
> + - mediatek,mt8173-smi-common
> + - mediatek,mt8183-smi-common
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-common
> + - const: mediatek,mt2701-smi-common
> +
> + reg:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. the async is only for generation 1 smi HW.
> + gals(global async local sync) also is optional, see below.
> + minItems: 2
> + maxItems: 4
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: async is asynchronous clock, it help transform the smi clock
> + into the emi clock domain.
> + - description: gals0 is the path0 clock of gals.
> + - description: gals1 is the path1 clock of gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 4
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - clocks
> + - clock-names
> +
> +allOf:
> + - if: #only for gen1 HW
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-common
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: async
> +
> + - if: #for gen2 HW that have gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt6779-smi-common
> + - mediatek,mt8183-smi-common
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 4
> + maxItems: 4
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> + - const: gals1
> +
> + else: #for gen2 HW that don't have gals
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + smi_common: smi@14022000 {
> + compatible = "mediatek,mt8173-smi-common";
> + reg = <0x14022000 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> + <&mmsys CLK_MM_SMI_COMMON>;
> + clock-names = "apb", "smi";
> + };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> deleted file mode 100644
> index 0c5de12b5496..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -SMI (Smart Multimedia Interface) Local Arbiter
> -
> -The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> -
> -Required properties:
> -- compatible : must be one of :
> - "mediatek,mt2701-smi-larb"
> - "mediatek,mt2712-smi-larb"
> - "mediatek,mt6779-smi-larb"
> - "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
> - "mediatek,mt8167-smi-larb"
> - "mediatek,mt8173-smi-larb"
> - "mediatek,mt8183-smi-larb"
> -- reg : the register and size of this local arbiter.
> -- mediatek,smi : a phandle to the smi_common node.
> -- power-domains : a phandle to the power domain of this local arbiter.
> -- clocks : Must contain an entry for each entry in clock-names.
> -- clock-names: must contain 2 entries, as follows:
> - - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> - the register.
> - - "smi" : It's the clock for transfer data and command.
> - and this optional clock name:
> - - "gals": the clock for GALS(Global Async Local Sync).
> - Here is the list which has this GALS: mt8183.
> -
> -Required property for mt2701, mt2712, mt6779, mt7623 and mt8167:
> -- mediatek,larb-id :the hardware id of this larb.
> -
> -Example:
> - larb1: larb@16010000 {
> - compatible = "mediatek,mt8173-smi-larb";
> - reg = <0 0x16010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> - clocks = <&vdecsys CLK_VDEC_CKEN>,
> - <&vdecsys CLK_VDEC_LARB_CKEN>;
> - clock-names = "apb", "smi";
> - };
> -
> -Example for mt2701:
> - larb0: larb@14010000 {
> - compatible = "mediatek,mt2701-smi-larb";
> - reg = <0 0x14010000 0 0x1000>;
> - mediatek,smi = <&smi_common>;
> - mediatek,larb-id = <0>;
> - clocks = <&mmsys CLK_MM_SMI_LARB0>,
> - <&mmsys CLK_MM_SMI_LARB0>;
> - clock-names = "apb", "smi";
> - power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> - };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> new file mode 100644
> index 000000000000..a11a105e872f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SMI (Smart Multimedia Interface) Local Arbiter
> +
> +maintainers:
> + - Yong Wu <yong.wu@xxxxxxxxxxxx>
> +
> +description: |+
> + The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> + - mediatek,mt8173-smi-larb
> + - mediatek,mt8183-smi-larb
> +
> + - description: for mt7623
> + items:
> + - const: mediatek,mt7623-smi-larb
> + - const: mediatek,mt2701-smi-larb
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + apb and smi are mandatory. gals(global async local sync) is optional.
> + minItems: 2
> + maxItems: 3
> + items:
> + - description: apb is Advanced Peripheral Bus clock, It's the clock for
> + setting the register.
> + - description: smi is the clock for transfer data and command.
> + - description: the clock for gals.
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + power-domains:
> + maxItems: 1
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: a phandle to the smi_common node.
> +
> + mediatek,larb-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 31
> + description: the hardware id of this larb.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> +
> +allOf:
> + - if: # HW has gals
> + properties:
> + compatible:
> + enum:
> + - mediatek,mt8183-smi-larb
> +
> + then:
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals
> +
> + else:
> + properties:
> + clock:
> + items:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt2701-smi-larb
> + - mediatek,mt2712-smi-larb
> + - mediatek,mt6779-smi-larb
> + - mediatek,mt8167-smi-larb
> +
> + then:
> + required:
> + - mediatek,larb-id
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt8173-smi-larb";
> + reg = <0x16010000 0x1000>;
> + mediatek,smi = <&smi_common>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&vdecsys CLK_VDEC_CKEN>,
> + <&vdecsys CLK_VDEC_LARB_CKEN>;
> + clock-names = "apb", "smi";
> + };
> --
> 2.18.0
