Re: [PATCH net-next v3 3/4] dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 30, 2020 at 12:29:49PM -0500, Dan Murphy wrote:
> The DP83TD510 is a 10M single twisted pair Ethernet PHY
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>  .../devicetree/bindings/net/ti,dp83td510.yaml | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,dp83td510.yaml b/Documentation/devicetree/bindings/net/ti,dp83td510.yaml
> new file mode 100644
> index 000000000000..aef949c1cfdd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,dp83td510.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2020 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/ti,dp83td510.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: TI DP83TD510 ethernet PHY
> +
> +allOf:
> +  - $ref: "ethernet-controller.yaml#"
> +  - $ref: "ethernet-phy.yaml#"
> +
> +maintainers:
> +  - Dan Murphy <dmurphy@xxxxxx>
> +
> +description: |
> +  The PHY is an twisted pair 10Mbps Ethernet PHY that support MII, RMII and
> +  RGMII interfaces.
> +
> +  Specifications about the Ethernet PHY can be found at:
> +    http://www.ti.com/lit/ds/symlink/dp83td510e.pdf
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +
> +  tx-fifo-depth:
> +    description: |
> +       Transmitt FIFO depth for RMII mode.  The PHY only exposes 4 nibble
> +       depths. The valid nibble depths are 4, 5, 6 and 8.
> +    enum: [ 4, 5, 6, 8 ]
> +    default: 5
> +
> +  rx-internal-delay-ps:
> +    description: |
> +       Setting this property to a non-zero number sets the RX internal delay
> +       for the PHY.  The internal delay for the PHY is fixed to 30ns relative
> +       to receive data.
> +
> +  tx-internal-delay-ps:
> +    description: |
> +       Setting this property to a non-zero number sets the TX internal delay
> +       for the PHY.  The internal delay for the PHY has a range of -4 to 4ns
> +       relative to transmit data.
> +
> +required:
> +  - reg
> +

I just got this feedback so I am passing it on.

Every dtbinding should have the additionalProperties set to false so
that dtbs_check can actually catch if there is a undefined property
used.

Ioana



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux