On Wed, Oct 7, 2020 at 7:51 AM Adam Ford <aford173@xxxxxxxxx> wrote:
>
> On Sun, Sep 27, 2020 at 12:00 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> >
> > The PMIC's interrupt is level low and should be pulled up. The PMIC's
> > device node had pinctrl-0 property but it lacked pinctrl-names which
> > is required to apply the pin configuration.
> >
>
> Thanks for the fixes!
>
> > Fixes: 5f67317bd967 ("arm64: dts: imx8mm: correct interrupt flags")
> > Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
> > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> Tested-by: Adam Ford <aford173@xxxxxxxxx>
>
Shawn,
Any chance you can apply this series? Without this patch, the pmic
driver throws some splat due to a previous fix.
thanks
adam
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> > index 6de86a4f0ec4..55b36bddd513 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> > @@ -72,6 +72,7 @@
> > pmic@4b {
> > compatible = "rohm,bd71847";
> > reg = <0x4b>;
> > + pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_pmic>;
> > interrupt-parent = <&gpio1>;
> > interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > --
> > 2.17.1
> >
