Hi Shawn,
I will document "nxp,lx2162a-qds".
For ethernet string, documentation seems correct.
Thanks,
Meenakshi
> -----Original Message-----
> From: Leo Li <leoyang.li@xxxxxxx>
> Sent: Monday, October 26, 2020 8:06 PM
> To: Shawn Guo <shawnguo@xxxxxxxxxx>; Meenakshi Aggarwal
> <meenakshi.aggarwal@xxxxxxx>
> Cc: robh+dt@xxxxxxxxxx; Varun Sethi <V.Sethi@xxxxxxx>; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; Ioana Ciornei <ioana.ciornei@xxxxxxx>; Kuldeep Singh
> <kuldeep.singh@xxxxxxx>
> Subject: RE: [PATCH v3 2/2] arm64: dts: lx2160a: add device tree for lx2162aqds
> board
>
>
>
> > -----Original Message-----
> > From: Shawn Guo <shawnguo@xxxxxxxxxx>
> > Sent: Monday, October 26, 2020 2:19 AM
> > To: Meenakshi Aggarwal <meenakshi.aggarwal@xxxxxxx>
> > Cc: robh+dt@xxxxxxxxxx; Varun Sethi <V.Sethi@xxxxxxx>; Leo Li
> > <leoyang.li@xxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Ioana
> > Ciornei <ioana.ciornei@xxxxxxx>; Kuldeep Singh <kuldeep.singh@xxxxxxx>
> > Subject: Re: [PATCH v3 2/2] arm64: dts: lx2160a: add device tree for
> > lx2162aqds board
> >
> > On Mon, Oct 19, 2020 at 09:00:33AM +0000, Meenakshi Aggarwal wrote:
> > > Hi,
> > >
> > > Any further comments?
> >
> > Please address the following checkpatch warnings.
> >
> > WARNING: DT compatible string "nxp,lx2162a-qds" appears un-documented
> > -- check ./Documentation/devicetree/bindings/
> > #49: FILE: arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts:13:
> > + compatible = "nxp,lx2162a-qds", "fsl,lx2160a";
> >
> > WARNING: DT compatible string "ethernet-phy-id001c.c916" appears un-
> > documented -- check ./Documentation/devicetree/bindings/
> > #80: FILE: arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts:44:
> > + compatible = "ethernet-phy-id001c.c916";
>
> Interesting that it doesn't match the following in
> Documentation/devicetree/bindings/net/ethernet-phy.yaml
>
> - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
> description:
> If the PHY reports an incorrect ID (or none at all) then the
> compatible list may contain an entry with the correct PHY ID
> in the above form.
> The first group of digits is the 16 bit Phy Identifier 1
> register, this is the chip vendor OUI bits 3:18. The
> second group of digits is the Phy Identifier 2 register,
> this is the chip vendor OUI bits 19:24, followed by 10
> bits of a vendor specific ID.
>
> >
> > WARNING: DT compatible string "ethernet-phy-id001c.c916" appears un-
> > documented -- check ./Documentation/devicetree/bindings/
> > #92: FILE: arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts:56:
> > + compatible = "ethernet-phy-id001c.c916";
> >
> >
> > Shawn
