From: Thierry Reding <treding@xxxxxxxxxx> The device tree node in the SoC file contains only the resources (such as registers, resets, ...) but none of the lane assignment information since that's board specific and belongs in the board file. Tested-by: Mikko Perttunen <mperttunen@xxxxxxxxxx> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> --- Changes in v2: - include dt-bindings/pinctrl/pinctrl-tegra-xusb.h so that board files don't have to include it explicitly - remove unneeded #address-cells/#size-cells = <0> - add padctl label for XUSB pad controller node arch/arm/boot/dts/tegra124.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 6e6bc4e8185c..b7cb944b2faa 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1,6 +1,7 @@ #include <dt-bindings/clock/tegra124-car.h> #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -449,6 +450,15 @@ clock-names = "pclk", "clk32k_in"; }; + padctl: padctl@0,7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + #phy-cells = <1>; + }; + sdhci@0,700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html