Re: [PATCH v2 1/3] dt-bindings: display: Add a property to deal with WiFi coexistence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nicolas,

On Thu, Oct 29, 2020 at 06:43:27PM +0100, Nicolas Saenz Julienne wrote:
> Hi maxime,
> 
> On Thu, 2020-10-29 at 14:40 +0100, Maxime Ripard wrote:
> > The RaspberryPi4 has both a WiFi chip and HDMI outputs capable of doing
> > 4k. Unfortunately, the 1440p resolution at 60Hz has a TMDS rate on the
> > HDMI cable right in the middle of the first Wifi channel.
> > 
> > Add a property to our HDMI controller, that could be reused by other
> > similar HDMI controllers, to allow the OS to take whatever measure is
> > necessary to avoid that crosstalk.
> > 
> > Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> > 
> > ---
> > 
> > Changes from v1:
> >   - Renamed the property
> >   - Split it into a separate patch
> > ---
> >  .../devicetree/bindings/display/brcm,bcm2711-hdmi.yaml      | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> > index 03a76729d26c..7ce06f9f9f8e 100644
> > --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> > +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> > @@ -76,6 +76,12 @@ properties:
> >    resets:
> >      maxItems: 1
> >  
> > +  wifi-2.4ghz-coexistence:
> 
> I see you already renamed the property, but I can't seem to find v1 of the
> series online.

I realized I didn't put you in Cc for the first version, sorry, you'll find it here:
https://lore.kernel.org/dri-devel/20200925130744.575725-1-maxime@xxxxxxxxxx/

> Sorry if this is redundant:
> 
> I wonder if it'd make sense to prefix the property like this:
> "raspberrypi,wifi-2.4ghz-coexistence." I tend to associate the lack of prefix
> with generic properties, and also thought it was a rule. Although I may have as
> well imagined it.

Rob in the first iteration asked for the opposite :)

It used to be a vendor-specific property, and since this issue is
basically cross-platform (as long as you can support 1440p and have
WiFi), it makes sense to make this a generic property

Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux