The RaspberryPi4 has both a WiFi chip and HDMI outputs capable of doing
4k. Unfortunately, the 1440p resolution at 60Hz has a TMDS rate on the
HDMI cable right in the middle of the first Wifi channel.
Add a property to our HDMI controller, that could be reused by other
similar HDMI controllers, to allow the OS to take whatever measure is
necessary to avoid that crosstalk.
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
Changes from v1:
- Renamed the property
- Split it into a separate patch
---
.../devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index 03a76729d26c..7ce06f9f9f8e 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -76,6 +76,12 @@ properties:
resets:
maxItems: 1
+ wifi-2.4ghz-coexistence:
+ type: boolean
+ description: >
+ Should the pixel frequencies in the WiFi frequencies range be
+ avoided?
+
required:
- compatible
- reg
--
2.26.2
