Am Donnerstag, den 29.10.2020, 07:18 -0500 schrieb Adam Ford:
> On Thu, Oct 29, 2020 at 6:55 AM Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> wrote:
> > Am Montag, den 26.10.2020, 11:23 -0500 schrieb Adam Ford:
> > > On Mon, Oct 26, 2020 at 10:44 AM Lucas Stach <
> > > l.stach@xxxxxxxxxxxxxx> wrote:
> > > > Am Montag, den 26.10.2020, 10:12 -0500 schrieb Adam Ford:
> > > > > On Mon, Oct 26, 2020 at 9:55 AM Abel Vesa <abel.vesa@xxxxxxx>
> > > > > wrote:
> > > > > > On 20-10-25 11:05:32, Adam Ford wrote:
> > > > > > > On Sun, Oct 25, 2020 at 7:19 AM Marek Vasut <
> > > > > > > marex@xxxxxxx> wrote:
> > > > > > > > On 10/25/20 1:05 PM, Abel Vesa wrote:
> > > > > > > >
> > > > > > > > [...]
> > > > > > > >
> > > > > > > > > > Together, both the GPC and the clk-blk driver
> > > > > > > > > > should be able to pull
> > > > > > > > > > the multimedia block out of reset. Currently, the
> > > > > > > > > > GPC can handle the
> > > > > > > > > > USB OTG and the GPU, but the LCDIF and MIPI DSI
> > > > > > > > > > appear to be gated by
> > > > > > > > > > the clock block
> > > > > > > > > >
> > > > > > > > > > My original patch RFC didn't include the imx8mn
> > > > > > > > > > node, because it
> > > > > > > > > > hangs, but the node I added looks like:
> > > > > > > > > >
> > > > > > > > > > media_blk_ctl: clock-controller@32e28000 {
> > > > > > > > > > compatible = "fsl,imx8mn-media-blk-ctl",
> > > > > > > > > > "syscon";
> > > > > > > > > > reg = <0x32e28000 0x1000>;
> > > > > > > > > > #clock-cells = <1>;
> > > > > > > > > > #reset-cells = <1>;
> > > > > > > > > > };
> > > > > > > > > >
> > > > > > > > > > I was hoping you might have some feedback on the
> > > > > > > > > > 8mn clk-blk driver
> > > > > > > > > > since you did the 8mp clk-blk drive and they appear
> > > > > > > > > > to be very
> > > > > > > > > > similar.
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > I'll do you one better still. I'll apply the patch in
> > > > > > > > > my tree and give it
> > > > > > > > > a test tomorrow morning.
> > > > > > >
> > > > > > > I do have some more updates on how to get the system to
> > > > > > > not hang, and
> > > > > > > to enumerate more clocks.
> > > > > > > Looking at Marek's work on enabling clocks in the 8MM, he
> > > > > > > added a
> > > > > > > power-domain in dispmix_blk_ctl pointing to the dispmix
> > > > > > > in the GPC.
> > > > > > > By forcing the GPC driver to write 0x1fff to 32e28004,
> > > > > > > 0x7f to
> > > > > > > 32e28000 and 0x30000 to 32e28008, the i.MX8MM can bring
> > > > > > > the display
> > > > > > > clocks out of reset.
> > > > > > >
> > > > > >
> > > > > > Yeah, that makes sense. Basically, it was trying to disable
> > > > > > unused clocks
> > > > > > (see clk_disable_unused) but in order to disable the clocks
> > > > > > from the
> > > > > > media BLK_CTL (which I think should be renamed in display
> > > > > > BLK_CTL) the
> > > > > > PD need to be on. Since you initially didn't give it any
> > > > > > PD, it was trying
> > > > > > to blindly write/read the gate bit and therefore freeze.
> > > > > >
> > > > > > > Unfortunately, the i.MX8MN needs to have 0x100 written to
> > > > > > > both
> > > > > > > 32e28000 and 32e28004, and the values written for the 8MM
> > > > > > > are not
> > > > > > > compatible.
> > > > > > > By forcing the GPC to write those values, I can
> > > > > > > get lcdif_pixel_clk
> > > > > > > and the mipi_dsi_clkref appearing on the Nano.
> > > > > >
> > > > > > I'm trying to make a branch with all the patches for all
> > > > > > i.MX8M so I
> > > > > > can keep track of it all. On this branch I've also applied
> > > > > > the
> > > > > > following patchset from Lucas Stach:
> > > > > > https://www.spinics.net/lists/arm-kernel/msg843007.html
> > > > > > but I'm getting the folowing errors:
> > > > > >
> > > > > > [ 16.690885] imx-pgc imx-pgc-domain.3: failed to power up
> > > > > > ADB400
> > > > > > [ 16.716839] imx-pgc imx-pgc-domain.3: failed to power up
> > > > > > ADB400
> > > > > > [ 16.730500] imx-pgc imx-pgc-domain.3: failed to power up
> > > > > > ADB400
> > > > > >
> > > > > > Lucas, any thoughts?
> > > > > >
> > > > > > Maybe it's something related to 8MN.
> > > > > >
> > > > > I will go back and double check this now that we have both
> > > > > the
> > > > > blt_crl->power-domain and the power-domain->blk_ctl.
> > > > >
> > > > > > Will dig further, see what pops out.
> > > > >
> > > > > I wasn't sure which direction to go with the name. I can
> > > > > rename the
> > > > > media_blk_ctl driver to display_blk_ctl. I used Media based
> > > > > on the
> > > > > imx8mp naming convention and the fact that it's controlling
> > > > > both the
> > > > > display and the camera interface, however it's depending on
> > > > > the
> > > > > dispmix GPC.
> > > > >
> > > > > I'll submit a RFC V2 with the cross referencing to the GPC
> > > > > based on
> > > > > Marek's Mini patch set, but we'll still have an issue where
> > > > > the Mini
> > > > > and Nano have different syscon values to enable the clocks,
> > > > > and
> > > > > Marek's branch has it card-coded, so my patch would
> > > > > effectively break
> > > > > the Mini in order to make the Nano operate until we find a
> > > > > better
> > > > > solution.
> > > >
> > > > The GPC should not write into the BLK_CTL region via syscon,
> > > > but
> > > > instead use the clocks and resets as exposed by the BLK_CTL
> > > > driver.
> > > > Doing it via syscon is a hack to get things going. The clocks
> > > > and
> > > > resets should properly be hooked up to the GPC domains via the
> > > > clocks
> > > > and resets DT properties.
> > > >
> > > > For the clocks there is one complication: if the clocks are
> > > > controlled
> > > > via BLK_CTL we can only enable them once the domain is powered
> > > > up,
> > > > however the earlier designs using the GPCv2 assert resets as
> > > > part of
> > > > the power up sequence, which needs the clocks to be running for
> > > > the
> > > > reset to propagate. So depending on whether we have a power
> > > > domain with
> > > > a BLK_CTL or not we need to enable the clocks before or after
> > > > powering
> > > > up the domain. I guess we need a new DT property to specify
> > > > which way
> > > > the domain needs to handled.
> > >
> > > So in the case of Nano, could we create two blocks instead of
> > > one?
> > > The first block would enable the bus clock and reset that
> > > correspond
> > > to writing 0x100 to avoid writing to syscon. From there, we
> > > reference
> > > that reset and clock from the GPC displaymix_pd to enable the
> > > access.
> > > Once that's done, we point the 2nd block power-domain to the
> > > dispmix_pd to unlock the remaining clocks.
> > >
> > > Would that work? I can try it later today, but I'm not near the
> > > hardware now.
> >
> > Splitting the PD into 2 staged domains might actually work well to
> > get
> > around the cyclic dependency between GPC and BLK_CTL. It's not
> > totally
> > to my liking, as the DT description doesn't map 1:1 to hardware
> > anymore, but it seems to be the most elegant solution to get around
> > the
> > dependency.
> >
> > I'll try to implement this on the i.MX8MM today or tomorrow to see
> > if
> > it holds up in reality or if there are some hidden warts.
>
> I tried it last night on the Nano without success. :-(
>
> I was just getting ready to e-mail the group when I saw this come in.
I was thinking the other way around, keeping a single BLK_CTL, but
splitting the PD to reflect the power-up sequence requirement. I'll let
you know how this works out.
Regards,
Lucas
