Re: [PATCH 07/14] dt-bindings: media: i2c: Add A31 MIPI CSI-2 bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 27, 2020 at 10:52:21AM +0100, Paul Kocialkowski wrote:
> Hi,
> 
> On Mon 26 Oct 20, 17:14, Maxime Ripard wrote:
> > i2c? :)
> 
> Oops, good catch!
>  
> > On Fri, Oct 23, 2020 at 07:45:39PM +0200, Paul Kocialkowski wrote:
> > > This introduces YAML bindings documentation for the A31 MIPI CSI-2
> > > controller.
> > > 
> > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > > ---
> > >  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 168 ++++++++++++++++++
> > >  1 file changed, 168 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > > new file mode 100644
> > > index 000000000000..9adc0bc27033
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > > @@ -0,0 +1,168 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> > > +
> > > +maintainers:
> > > +  - Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    oneOf:
> > > +      - const: allwinner,sun6i-a31-mipi-csi2
> > > +      - items:
> > > +          - const: allwinner,sun8i-v3s-mipi-csi2
> > > +          - const: allwinner,sun6i-a31-mipi-csi2
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Bus Clock
> > > +      - description: Module Clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: bus
> > > +      - const: mod
> > > +
> > > +  phys:
> > > +    items:
> > > +      - description: MIPI D-PHY
> > > +
> > > +  phy-names:
> > > +    items:
> > > +      - const: dphy
> > > +
> > > +  resets:
> > > +    maxItems: 1
> > > +
> > > +  # See ./video-interfaces.txt for details
> > > +  ports:
> > > +    type: object
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        type: object
> > > +        description: Input port, connect to a MIPI CSI-2 sensor
> > > +
> > > +        properties:
> > > +          reg:
> > > +            const: 0
> > > +
> > > +          endpoint:
> > > +            type: object
> > > +
> > > +            properties:
> > > +              remote-endpoint: true
> > > +
> > > +              bus-type:
> > > +                const: 4
> > > +
> > > +              clock-lanes:
> > > +                maxItems: 1
> > > +
> > > +              data-lanes:
> > > +                minItems: 1
> > > +                maxItems: 4
> > > +
> > > +            required:
> > > +              - bus-type
> > > +              - data-lanes
> > > +              - remote-endpoint
> > > +
> > > +            additionalProperties: false
> > > +
> > > +        required:
> > > +          - endpoint
> > > +
> > > +        additionalProperties: false
> > > +
> > > +      port@1:
> > > +        type: object
> > > +        description: Output port, connect to a CSI controller
> > > +
> > > +        properties:
> > > +          reg:
> > > +            const: 1
> > > +
> > > +          endpoint:
> > > +            type: object
> > > +
> > > +            properties:
> > > +              remote-endpoint: true
> > > +
> > > +              bus-type:
> > > +                const: 4
> > 
> > That one seems a bit weird. If the input and output ports are using the
> > same format, what is that "bridge" supposed to be doing?
> 
> Fair enough. What this represents is the internal link (likely a FIFO) between
> the two controllers. It is definitely not a MIPI CSI-2 bus but there's no
> mbus type for an internal link (probably because it's not a bus after all).
> 
> Note that on the CSI controller side, we need the bus-type to be set to 4 for it
> to properly select the MIPI CSI-2 input. So it just felt more logical to have
> the same on the other side of the endpoint. On the other hand, we can just
> remove it on the MIPI CSI-2 controller side since it won't check it and have it
> fallback to the unknown mbus type.
> 
> But that would make the types inconsistent on the two sides of the link.
> I don't think V4L2 will complain about it at the moment, but it would also make
> sense that it does eventually.
> 
> What do you think?

There's still the same issue though, it doesn't make any sense that a
bridge doesn't change the bus type. If it really did, we wouldn't need
that in the first place.

What you want to check in your driver is whether the subdev you're
connected to has a sink pad that uses MIPI-CSI

Maxime

> > > +            additionalProperties: false
> > > +
> > > +        required:
> > > +          - endpoint
> > > +
> > > +        additionalProperties: false
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - interrupts
> > > +  - clocks
> > > +  - clock-names
> > > +  - resets
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > > +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> > > +
> > > +    mipi_csi2: mipi-csi2@1cb1000 {
> > 
> > The unit name should be pretty standard, with the list here:
> > 
> > https://github.com/devicetree-org/devicetree-specification/blob/master/source/chapter2-devicetree-basics.rst#generic-names-recommendation
> > 
> > there's nothing really standing out for us in that list, but given that
> > there's dsi, we should stick with csi
> 
> Then what really surprises me is that the CSI controllers are called "camera",
> not "csi". If "camera" is supposed to cover both image sensor and camera sensor
> interfaces, it would probably fit MIPI CSI-2 as well.
> 
> I see lots of names with -controller for controllers with specific devices
> attached, like "nand-controller" or "lcd-controller". Maybe using
> "camera-controller" for the CSI and MIPI CSI-2 controllers would make the most
> sense, while keeping "camera" for the actual image sensors.
> 
> What do you think?

If you really want to discuss this, feel free to open a PR for the DT
spec and add it. However, I still think this csi would be best here:
it's neither a camera nor a camera controller

maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux