On Fri, Oct 23, 2020 at 07:45:32PM +0200, Paul Kocialkowski wrote: > This series introduces support for MIPI CSI-2, with the A31 controller that is > found on most SoCs (A31, V3s and probably V5) as well as the A83T-specific > controller. While the former uses the same MIPI D-PHY that is already supported > for DSI, the latter embeds its own D-PHY. > > In order to distinguish the use of the D-PHY between Rx mode (for MIPI CSI-2) > and Tx mode (for MIPI DSI), a submode is introduced for D-PHY in the PHY API. > This allows adding Rx support in the A31 D-PHY driver. > > A few changes and fixes are applied to the A31 CSI controller driver, in order > to support the MIPI CSI-2 use-case. > > Follows is the V4L2 device topology representing the interactions between > the MIPI CSI-2 sensor, the MIPI CSI-2 controller (which controls the D-PHY) > and the CSI controller: > - entity 1: sun6i-csi (1 pad, 1 link) > type Node subtype V4L flags 0 > device node name /dev/video0 > pad0: Sink > <- "sun6i-mipi-csi2":1 [ENABLED,IMMUTABLE] > > - entity 5: sun6i-mipi-csi2 (2 pads, 2 links) > type V4L2 subdev subtype Unknown flags 0 > pad0: Sink > <- "ov5648 0-0036":0 [ENABLED,IMMUTABLE] > pad1: Source > -> "sun6i-csi":0 [ENABLED,IMMUTABLE] > > - entity 8: ov5648 0-0036 (1 pad, 1 link) > type V4L2 subdev subtype Sensor flags 0 > device node name /dev/v4l-subdev0 > pad0: Source > [fmt:SBGGR8_1X8/640x480@1/30 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range] > -> "sun6i-mipi-csi2":0 [ENABLED,IMMUTABLE] > > Happy reviewing! I mentioned it to Kevin in the first version, but you should have a v4l2-compliance run here. If you have some time, it would be great to run libcamera as well. Maxime
Attachment:
signature.asc
Description: PGP signature
