Re: [PATCH 1/7] ARM: stih407: Add DT nodes for for PWM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 18 Jun 2014, Gabriel Fernandez wrote:

> Hi Lee,
> minor remark below..
> 
> On 18 June 2014 16:52, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > Supply top level nodes for the STiH407 based development boards.
> > The Pinctrl configuration has already been applied, so the only
> > missing piece of the DT puzzle is for a board's DTB to enable
> > the nodes.
> >
> > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/stih407.dtsi | 27 +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> > index 4f9024f..6b43ba2 100644
> > --- a/arch/arm/boot/dts/stih407.dtsi
> > +++ b/arch/arm/boot/dts/stih407.dtsi
> > @@ -259,5 +259,32 @@
> >
> >                         status = "disabled";
> >                 };
> > +
> > +               /* COMMS PWM Module */
> > +               pwm0: pwm@9810000 {
> > +                       compatible      = "st,sti-pwm";
> > +                       status          = "disabled";
> > +                       #pwm-cells      = <2>;
> > +                       reg             = <0x9810000 0x68>;
> > +                       pinctrl-names   = "default";
> > +                        pinctrl-0      = <&pinctrl_pwm0_chan0_default>;
> del space

Fixing, thanks.

> > +                       clock-names     = "pwm";
> > +                       clocks          = <&clk_sysin>;
> > +               };
> > +
> > +               /* SBC PWM Module */
> > +               pwm1: pwm@9510000 {
> > +                       compatible      = "st,sti-pwm";
> > +                       status          = "disabled";
> > +                       #pwm-cells      = <2>;
> > +                       reg             = <0x9510000 0x68>;
> > +                       pinctrl-names   = "default";
> > +                       pinctrl-0       = <&pinctrl_pwm1_chan0_default
> > +                                       &pinctrl_pwm1_chan1_default
> > +                                       &pinctrl_pwm1_chan2_default
> > +                                       &pinctrl_pwm1_chan3_default>;
> > +                       clock-names     = "pwm";
> > +                       clocks          = <&clk_sysin>;
> > +               };
> >         };
> >  };
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux