Hi Lee,
minor remark below..
On 18 June 2014 16:52, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> Supply top level nodes for the STiH407 based development boards.
> The Pinctrl configuration has already been applied, so the only
> missing piece of the DT puzzle is for a board's DTB to enable
> the nodes.
>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/stih407.dtsi | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 4f9024f..6b43ba2 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -259,5 +259,32 @@
>
> status = "disabled";
> };
> +
> + /* COMMS PWM Module */
> + pwm0: pwm@9810000 {
> + compatible = "st,sti-pwm";
> + status = "disabled";
> + #pwm-cells = <2>;
> + reg = <0x9810000 0x68>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
del space
> + clock-names = "pwm";
> + clocks = <&clk_sysin>;
> + };
> +
> + /* SBC PWM Module */
> + pwm1: pwm@9510000 {
> + compatible = "st,sti-pwm";
> + status = "disabled";
> + #pwm-cells = <2>;
> + reg = <0x9510000 0x68>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1_chan0_default
> + &pinctrl_pwm1_chan1_default
> + &pinctrl_pwm1_chan2_default
> + &pinctrl_pwm1_chan3_default>;
> + clock-names = "pwm";
> + clocks = <&clk_sysin>;
> + };
> };
> };
> --
> 1.8.3.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
