Re: [PATCH v3 2/3] arm64: dts: qcom: trogdor: Add brightness-levels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Oct 21, 2020 at 10:05 PM Alexandru Stan <amstan@xxxxxxxxxxxx> wrote:
>
> We want userspace to represent the human perceived brightness.
> Since the led drivers and the leds themselves don't have a
> linear response to the value we give them in terms of perceived
> brightness, we'll bake the curve into the dts.
>
> The panel also doesn't have a good response under 5%, so we'll avoid
> sending it anything lower than that.
>
> Note: Ideally this patch should be coupled with the driver change from
> "backlight: pwm_bl: Fix interpolation", but it can work without it,
> without looking too ugly.
>
> Signed-off-by: Alexandru Stan <amstan@xxxxxxxxxxxx>
> ---
>
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux