In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/boot/dts/exynos54xx.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 6daeba7d6b49..4983f8192822 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -629,7 +629,7 @@ usb_dwc3 {
#size-cells = <1>;
ranges;
- usbdrd_dwc3: dwc3@12000000 {
+ usbdrd_dwc3: usb@12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 8aa5117e58ce..339243d19a80 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -148,7 +148,7 @@ usbdrd3_0: usb3-0 {
#size-cells = <1>;
ranges;
- usbdrd_dwc3_0: dwc3@12000000 {
+ usbdrd_dwc3_0: usb@12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -170,7 +170,7 @@ usbdrd3_1: usb3-1 {
#size-cells = <1>;
ranges;
- usbdrd_dwc3_1: dwc3@12400000 {
+ usbdrd_dwc3_1: usb@12400000 {
compatible = "snps,dwc3";
reg = <0x12400000 0x10000>;
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
--
2.27.0
