In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 74ac4ac75865..3320e596cb3f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1651,7 +1651,7 @@ usbdrd30: usbdrd {
ranges;
status = "disabled";
- usbdrd_dwc3: dwc3@15400000 {
+ usbdrd_dwc3: usb@15400000 {
compatible = "snps,dwc3";
clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
<&cmu_fsys CLK_ACLK_USBDRD30>,
@@ -1704,7 +1704,7 @@ usbhost30: usbhost {
ranges;
status = "disabled";
- usbhost_dwc3: dwc3@15a00000 {
+ usbhost_dwc3: usb@15a00000 {
compatible = "snps,dwc3";
clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
<&cmu_fsys CLK_ACLK_USBHOST30>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index b9ed6a33e290..48cd3a04fd07 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -654,7 +654,7 @@ usbdrd3 {
#size-cells = <1>;
ranges;
- dwc3@15400000 {
+ usb@15400000 {
compatible = "snps,dwc3";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
--
2.27.0
