[PATCH v2 4/4] ARM: dts: stm32: update stm32mp151 for remote proc synchronization support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Two backup registers are used to store the Cortex-M4 state and the resource
table address.
Declare the tamp node and add associated properties in m4_rproc node
to allow Linux to attach to a firmware loaded by the first boot stages.

Associated driver implementation is available in commit 9276536f455b3
("remoteproc: stm32: Parse syscon that will manage M4 synchronisation").

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index bfe29023fbd5..842ecffae73a 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1541,6 +1541,11 @@
 			status = "disabled";
 		};
 
+		tamp: tamp@5c00a000 {
+			compatible = "st,stm32-tamp", "syscon";
+			reg = <0x5c00a000 0x400>;
+		};
+
 		/*
 		 * Break node order to solve dependency probe issue between
 		 * pinctrl and exti.
@@ -1717,6 +1722,8 @@
 			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
 			st,syscfg-tz = <&rcc 0x000 0x1>;
 			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
+			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
 			status = "disabled";
 		};
 	};
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux