Convert mediatek,mtk-xhci.txt to YAML schema mediatek,mtk-xhci.yaml
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2: new patch
---
.../bindings/usb/mediatek,mtk-xhci.txt | 121 ------------
.../bindings/usb/mediatek,mtk-xhci.yaml | 180 ++++++++++++++++++
2 files changed, 180 insertions(+), 121 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
deleted file mode 100644
index 42d8814f903a..000000000000
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-MT8173 xHCI
-
-The device node for Mediatek SOC USB3.0 host controller
-
-There are two scenarios: the first one only supports xHCI driver;
-the second one supports dual-role mode, and the host is based on xHCI
-driver. Take account of backward compatibility, we divide bindings
-into two parts.
-
-1st: only supports xHCI driver
-------------------------------------------------------------------------
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
- soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
- "mediatek,mtk-xhci" compatible string, you need SoC specific ones in
- addition, one of:
- - "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control
- - interrupts : interrupt used by the controller
- - power-domains : a phandle to USB power domain node to control USB's
- mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
- entry in clock-names
- - clock-names : must contain
- "sys_ck": controller clock used by normal mode,
- the following ones are optional:
- "ref_ck": reference clock used by low power mode etc,
- "mcu_ck": mcu_bus clock for register access,
- "dma_ck": dma_bus clock for data transfer by DMA,
- "xhci_ck": controller clock
-
- - phys : see usb-hcd.yaml in the current directory
-
-Optional properties:
- - wakeup-source : enable USB remote wakeup;
- - mediatek,syscon-wakeup : phandle to syscon used to access the register
- of the USB wakeup glue layer between xHCI and SPM; it depends on
- "wakeup-source", and has two arguments:
- - the first one : register base address of the glue layer in syscon;
- - the second one : hardware version of the glue layer
- - 1 : used by mt8173 etc
- - 2 : used by mt2712 etc
- - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
- bit1 for u3port1, ... etc;
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
- - pinctrl-names : a pinctrl state named "default" must be defined
- - pinctrl-0 : pin control group
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- - imod-interval-ns: default interrupt moderation interval is 5000ns
-
-additionally the properties from usb-hcd.yaml (in the current directory) are
-supported.
-
-Example:
-usb30: usb@11270000 {
- compatible = "mediatek,mt8173-xhci";
- reg = <0 0x11270000 0 0x1000>,
- <0 0x11280700 0 0x0100>;
- reg-names = "mac", "ippc";
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
- clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
- <&pericfg CLK_PERI_USB0>,
- <&pericfg CLK_PERI_USB1>;
- clock-names = "sys_ck", "ref_ck";
- phys = <&phy_port0 PHY_TYPE_USB3>,
- <&phy_port1 PHY_TYPE_USB2>;
- vusb33-supply = <&mt6397_vusb_reg>;
- vbus-supply = <&usb_p1_vbus>;
- usb3-lpm-capable;
- mediatek,syscon-wakeup = <&pericfg 0x400 1>;
- wakeup-source;
- imod-interval-ns = <10000>;
-};
-
-2nd: dual-role mode with xHCI driver
-------------------------------------------------------------------------
-
-In the case, xhci is added as subnode to mtu3. An example and the DT binding
-details of mtu3 can be found in:
-Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-
-Required properties:
- - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci",
- soc-model is the name of SoC, such as mt8173, mt2712 etc, when using
- "mediatek,mtk-xhci" compatible string, you need SoC specific ones in
- addition, one of:
- - "mediatek,mt8173-xhci"
- - reg : specifies physical base address and size of the registers
- - reg-names: should be "mac" for xHCI MAC
- - interrupts : interrupt used by the host controller
- - power-domains : a phandle to USB power domain node to control USB's
- mtcmos
- - vusb33-supply : regulator of USB avdd3.3v
-
- - clocks : a list of phandle + clock-specifier pairs, one for each
- entry in clock-names
- - clock-names : must contain "sys_ck", and the following ones are optional:
- "ref_ck", "mcu_ck" and "dma_ck", "xhci_ck"
-
-Optional properties:
- - vbus-supply : reference to the VBUS regulator;
- - usb3-lpm-capable : supports USB3.0 LPM
-
-Example:
-usb30: usb@11270000 {
- compatible = "mediatek,mt8173-xhci";
- reg = <0 0x11270000 0 0x1000>;
- reg-names = "mac";
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
- clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
- clock-names = "sys_ck", "ref_ck";
- vusb33-supply = <&mt6397_vusb_reg>;
- usb3-lpm-capable;
-};
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
new file mode 100644
index 000000000000..ea696c8f1269
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 xHCI Device Tree Bindings
+
+maintainers:
+ - Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
+
+allOf:
+ - $ref: "usb-hcd.yaml"
+
+description: |
+ There are two scenarios:
+ case 1: only supports xHCI driver;
+ case 2: supports dual-role mode, and the host is based on xHCI driver.
+
+properties:
+ #common properties for both case 1 and case 2
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt2712-xhci
+ - mediatek,mt7622-xhci
+ - mediatek,mt7629-xhci
+ - mediatek,mt8173-xhci
+ - mediatek,mt8183-xhci
+ - const: mediatek,mtk-xhci
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: the registers of xHCI MAC
+ - description: the registers of IP Port Control
+
+ reg-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: mac
+ - const: ippc #optional, only needed for case 1.
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle to USB power domain node to control USB's MTCMOS
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+ items:
+ - description: Controller clock used by normal mode
+ - description: Reference clock used by low power mode etc
+ - description: Mcu bus clock for register access
+ - description: DMA bus clock for data transfer
+ - description: controller clock
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
+ items:
+ - const: sys_ck #required, the following ones are optional
+ - const: ref_ck
+ - const: mcu_ck
+ - const: dma_ck
+ - const: xhci_ck
+
+ phys:
+ $ref: /usb/usb-hcd.yaml#
+
+ vusb33-supply:
+ description: Regulator of USB AVDD3.3v
+
+ vbus-supply:
+ description: Regulator of USB VBUS5v
+
+ usb3-lpm-capable:
+ description: supports USB3.0 LPM
+ type: boolean
+
+ imod-interval-ns:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Interrupt moderation interval value, it is 8 times as much as that
+ defined in the xHCI spec on MTK's controller.
+ default: 5000
+
+ #the following properties are only used for case 1
+ pinctrl-0:
+ description: A phandle to the default pinctrl state.
+
+ pinctrl-names:
+ description: A pinctrl state named "default" must be defined.
+ See pinctrl/pinctrl-bindings.txt
+ const: default
+
+ wakeup-source:
+ description: enable USB remote wakeup, see power/wakeup-source.txt
+ type: boolean
+
+ mediatek,syscon-wakeup:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ description: |
+ A phandle to syscon used to access the register of the USB wakeup glue
+ layer between xHCI and SPM, the field should always be a multiple of
+ 3 cells long.
+
+ items:
+ - description:
+ The first cell represents a phandle to syscon
+ - description:
+ The second cell represents the register base address of the glue
+ layer in syscon
+ - description:
+ The third cell represents the hardware version of the glue layer,
+ 1 is used by mt8173 etc, 2 is used by mt2712 etc
+ enum: [1, 2]
+
+ mediatek,u3p-dis-msk:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The mask to disable u3ports, bit0 for u3port0,
+ bit1 for u3port1, ... etc
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^[a-f]+@[0-9a-f]+$":
+ $ref: /usb/usb-hcd.yaml#
+ type: object
+ description: The hard wired USB devices.
+
+dependencies:
+ wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ usb3: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+ reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+ clock-names = "sys_ck", "ref_ck";
+ phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ imod-interval-ns = <10000>;
+ mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+ wakeup-source;
+ usb3-lpm-capable;
+ };
+...
--
2.18.0
