On Wed, Oct 7, 2020 at 3:03 PM Marek Vasut <marex@xxxxxxx> wrote: > > On 10/7/20 9:52 PM, Adam Ford wrote: > > On Sun, Oct 4, 2020 at 12:53 AM Marek Vasut <marex@xxxxxxx> wrote: > >> > >> Add the i.MX8MM BLK_CTL compatible string to the list. > [...] > >> --- > >> Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 1 + > >> 1 file changed, 1 insertion(+) > >> > > > > Is there a DTSI change part of this patch? I was going to try to test > > it, but I am not seeing a change to the imx8mm.dtsi, and I am not > > sure where to put the node. > > There are in fact quite a few other pieces you need to have in place, > this patchset in itself is not particularly useful, it is just infra for > the LCDIF and MIPI DSIM block control. You might want to wait until they > all land in next and test that result. I have several patches in place, the GPCv2, this block driver, enabling GPU DT node, I'm also working on the DSIM patch you posted. I was hoping to test them all together and reply to the various threads with tested-by. I also want to get my device tree stuff ready on the beacon boards so when everything lands, I can post DTS updates to enable the LCDIF, DSI, and the HDMI bridge. If you have a repo somewhere that has all these combined, I can just work on the final layer to enable the device tree plumbing on my board. I just need the imx8mm.dtsi changes for this, DSIM, and the LCDIF so I can finish the task. adam
