[PATCH 1/2] dt-bindings: drm/bridge: ti-sn65dsi86: Replace #pwm-cells

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While the signal on GPIO4 to drive the backlight controller indeed is
pulse width modulated its purpose is specifically to control the
brightness of a backlight.

Drop the #pwm-cells and instead expose a new property to configure the
granularity of the backlight PWM signal.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index f8622bd0f61e..e380218b4646 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -66,9 +66,12 @@ properties:
       1-based to match the datasheet.  See ../../gpio/gpio.txt for more
       information.
 
-  '#pwm-cells':
-    const: 1
-    description: See ../../pwm/pwm.yaml for description of the cell formats.
+  ti,backlight-scale:
+    description:
+      The granularity of brightness for the PWM signal provided on GPIO4, if
+      this property is specified.
+    minimum: 0
+    maximum: 65535
 
   ports:
     type: object
-- 
2.28.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux