[PATCH v2 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We need to set various bits in the hardware registers for this device to
operate properly depending on how it is installed. Add a handful of DT
properties to configure these things.

Cc: Daniel Campello <campello@xxxxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: <devicetree@xxxxxxxxxxxxxxx>
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
Cc: Evan Green <evgreen@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 .../iio/proximity/semtech,sx9310.yaml         | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5739074d3592..a85b8fa25861 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -40,6 +40,61 @@ properties:
   "#io-channel-cells":
     const: 1
 
+  semtech,cs0-ground:
+    description: Indicates the CS0 sensor is connected to ground.
+    type: boolean
+
+  semtech,combined-sensors:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      List of which sensors are combined and represented by CS3.
+      Possible values are -
+      3        - CS3 (internal)
+      0 1      - CS0 + CS1
+      1 2      - CS1 + CS2 (default)
+      0 1 2 3  - CS0 + CS1 + CS2 + CS3
+    minItems: 1
+    maxItems: 4
+
+  semtech,resolution:
+    description:
+      Capacitance measure resolution. Refer to datasheet for more details.
+    enum:
+      - coarsest
+      - very-coarse
+      - coarse
+      - medium-coarse
+      - medium
+      - fine
+      - very-fine
+      - finest
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Sensor used for start-up proximity detection. The combined
+      sensor is represented by the value 3. This is used for initial
+      compensation.
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 2, 4, 8]
+    default: 2
+    description:
+      PROXRAW filter strength. A value of 0 represents off, and other values
+      represent 1-1/N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description:
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
 required:
   - compatible
   - reg
@@ -61,5 +116,11 @@ examples:
         vdd-supply = <&pp3300_a>;
         svdd-supply = <&pp1800_prox>;
         #io-channel-cells = <1>;
+        semtech,cs0-ground;
+        semtech,combined-sensors = <1 2 3>;
+        semtech,resolution = "fine";
+        semtech,startup-sensor = <1>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
       };
     };
-- 
Sent by a computer, using git, on the internet




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux