PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards. Possible baseboards are, - EDIMM2.2 Starter Kit - C.TOUCH 2.0 Carrier Board Changes for v4: - collect Rob A-b Changes for v3: - resolved Johan comments about sorting node properties - add copyright to Amarula Solutions - update px30 dtsi author Changes for v2: - include C.TOUCH 2.0 carrier board - skip 10" OF LCD as it requires separate dts with panel support. Note: These baseboards can be used for i.MX8 SOM's as well. So having baseboard on respective SoC seems to be easy rather than making it common across all. Any inputs? Jagan. Jagan Teki (6): dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0 arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 Michael Trimarchi (1): arm64: dts: rockchip: Add Engicam PX30.Core SOM .../devicetree/bindings/arm/rockchip.yaml | 12 + arch/arm64/boot/dts/rockchip/Makefile | 2 + .../dts/rockchip/px30-engicam-common.dtsi | 39 +++ .../dts/rockchip/px30-engicam-ctouch2.dtsi | 8 + .../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 + .../dts/rockchip/px30-px30-core-ctouch2.dts | 22 ++ .../dts/rockchip/px30-px30-core-edimm2.2.dts | 21 ++ .../boot/dts/rockchip/px30-px30-core.dtsi | 232 ++++++++++++++++++ 8 files changed, 343 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi -- 2.25.1