> The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with
> Low Jitter Mode. This patch adds support for these two clocks.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/clock/maxim,max77802.txt | 40 ++++
> drivers/clk/Kconfig | 6 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-max77802.c | 253 +++++++++++++++++++++
> drivers/mfd/max77802.c | 3 +
> include/dt-bindings/clock/maxim,max77802.h | 22 ++
> 6 files changed, 325 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
> create mode 100644 drivers/clk/clk-max77802.c
> create mode 100644 include/dt-bindings/clock/maxim,max77802.h
[...]
> diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c
> index 59696dd..33e8023 100644
> --- a/drivers/mfd/max77802.c
> +++ b/drivers/mfd/max77802.c
> @@ -35,6 +35,9 @@
>
> static const struct mfd_cell max77802_devs[] = {
> { .name = "max77802-pmic", },
> +#if defined(CONFIG_COMMON_CLK_MAX77802)
No, don't do that. If COMMON_CLK_MAX77802 is not defined it just
won't be matched, which is enough to ensure it won't be probed.
> + { .name = "max77802-clk", },
> +#endif
> };
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
