Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> writes: > Add documentation for the binding of Toshiba Visconti SoC's watchdog. > > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> > --- > .../watchdog/toshiba,visconti-wdt.yaml | 49 +++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml > > diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml > new file mode 100644 > index 000000000000..721e38fa5a0f > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml > @@ -0,0 +1,49 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2020 Toshiba Electronic Devices & Storage Corporation > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Toshiba Visconti SoCs PIUWDT Watchdog timer > + > +maintainers: > + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> > + > +allOf: > + - $ref: watchdog.yaml# > + > +properties: > + compatible: > + enum: > + - toshiba,visconti-wdt > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - clocks > + > +examples: > + - | > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + wdt_clk: wdt-clk { > + compatible = "fixed-clock"; > + clock-frequency = <150000000>; > + #clock-cells = <0>; > + }; > + > + watchdog@28330000 { > + compatible = "toshiba,visconti-wdt"; > + reg = <0 0x28330000 0 0x1000>; > + clocks = <&wdt_clk>; > + }; I was going to suggest adding the "timeout-sec" property as described in watchdog.yaml but both code and usage seems to suggest it is optional. > + }; So, Reviewed-by: Punit Agrawal <punit1.agrawal@xxxxxxxxxxxxx> Thanks.