[PATCH v2] dt-bindings: mfd: rohm,bd71837-pmic: Add common properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add common properties appearing in DTSes (clock-names,
clock-output-names) with the common values (actually used in DTSes) to
fix dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml:
    pmic@4b: 'clock-names', 'clock-output-names', do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

Changes since v1:
1. Define the names, as used in existing DTS files.
---
 .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml          | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
index 65018a019e1d..3bfdd33702ad 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -32,9 +32,15 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    const: osc
+
   "#clock-cells":
     const: 0
 
+  clock-output-names:
+    const: pmic_clk
+
 # The BD718x7 supports two different HW states as reset target states. States
 # are called as SNVS and READY. At READY state all the PMIC power outputs go
 # down and OTP is reload. At the SNVS state all other logic and external
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux