Re: [PATCH v2 2/2] USB: misc: Add onboard_usb_hub driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 17, 2020 at 11:46:22AM -0700, Matthias Kaehlcke wrote:
> The main issue this driver addresses is that a USB hub needs to be
> powered before it can be discovered. For onboard hubs this is often
> solved by supplying the hub with an 'always-on' regulator, which is
> kind of a hack. Some onboard hubs may require further initialization
> steps, like changing the state of a GPIO or enabling a clock, which
> requires further hacks. This driver creates a platform device
> representing the hub which performs the necessary initialization.
> Currently it only supports switching on a single regulator, support
> for multiple regulators or other actions can be added as needed.
> Different initialization sequences can be supported based on the
> compatible string.
> 
> Besides performing the initialization the driver can be configured
> to power the hub off during system suspend. This can help to extend
> battery life on battery powered devices which have no requirements
> to keep the hub powered during suspend. The driver can also be
> configured to leave the hub powered when a wakeup capable USB device
> is connected when suspending, and power it off otherwise.
> 
> Technically the driver consists of two drivers, the platform driver
> described above and a very thin USB driver that subclasses the
> generic driver. The purpose of this driver is to provide the platform
> driver with the USB devices corresponding to the hub(s) (a hub
> controller may provide multiple 'logical' hubs, e.g. one to support
> USB 2.0 and another for USB 3.x).
> 
> Co-developed-by: Ravi Chandra Sadineni <ravisadineni@xxxxxxxxxxxx>
> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@xxxxxxxxxxxx>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

> +config USB_ONBOARD_HUB
> +	tristate "Onboard USB hub support"
> +	depends on OF
> +	help
> +	  Say Y here if you want to support onboard USB hubs. The driver
> +	  powers supported hubs on and may perform other initialization
> +	  steps.

I have a nagging feeling that this description may be too vague for a
lot of people to understand.  Does everybody know what an "onboard"
USB hub is?

Consider for example that Intel's current EHCI host controllers all
come with a USB hub built into the chipset.  That built-in hub
certainly could be considered "onboard", but it doesn't need this
driver.

Maybe also give some examples of devices that require this driver, to
help make the idea clear to readers.


> +static int __maybe_unused onboard_hub_suspend(struct device *dev)
> +{
> +	struct onboard_hub *hub = dev_get_drvdata(dev);
> +	struct udev_node *node;
> +	int rc = 0;
> +
> +	hub->has_wakeup_capable_descendants = false;
> +
> +	if (!hub->power_off_in_suspend)
> +		return 0;
> +
> +	mutex_lock(&hub->lock);
> +
> +	list_for_each_entry(node, &hub->udev_list, list) {
> +		if (!device_may_wakeup(node->udev->bus->controller))
> +			break;

You're assuming that node->udev->bus->controller is going to be the
same for the nodes on the list, right?

> +
> +		if (usb_wakeup_enabled_descendants(node->udev)) {
> +			hub->has_wakeup_capable_descendants = true;
> +			break;
> +		}
> +	}
> +
> +	mutex_unlock(&hub->lock);
> +
> +	if (!hub->has_wakeup_capable_descendants)
> +		rc = onboard_hub_power_off(hub);
> +
> +	return rc;
> +}
> +
> +static int __maybe_unused onboard_hub_resume(struct device *dev)
> +{
> +	struct onboard_hub *hub = dev_get_drvdata(dev);
> +	int rc = 0;
> +
> +	if (hub->power_off_in_suspend && !hub->has_wakeup_capable_descendants)

Instead of this cumbersome two-condition test, how about simply
having a hub->is_powered_on flag?  Then
hub->has_wakeup_capable_descendants wouldn't be needed.

> +		rc = onboard_hub_power_on(hub);
> +
> +	return rc;
> +}

> +static int onboard_hub_remove_usbdev(struct onboard_hub *hub, struct usb_device *udev)
> +{
> +	struct udev_node *node;
> +
> +	mutex_lock(&hub->lock);
> +
> +	list_for_each_entry(node, &hub->udev_list, list) {
> +		if (node->udev == udev) {
> +			list_del(&node->list);
> +			devm_kfree(hub->dev, node);

Why have an explicit kfree here but not anywhere else?  And if you do
have an explicit kfree, why use devm_kzalloc rather than plain kzalloc?

> +			break;
> +		}
> +	}
> +
> +	mutex_unlock(&hub->lock);
> +
> +	if (node == NULL)
> +		return -EINVAL;

This test is wrong.  Look at the definition of list_for_each_entry;
node will never be NULL.  Probably the best approach is to use a local
"ret" variable.

> +
> +	return 0;
> +}

> +static int onboard_hub_remove(struct platform_device *pdev)
> +{
> +	struct onboard_hub *hub = dev_get_drvdata(&pdev->dev);
> +
> +	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_power_off_in_suspend.attr);
> +
> +	return onboard_hub_power_off(hub);
> +}

Shouldn't this routine unbind the onboard_hub_usbdev driver from all
the associated devices?  Otherwise you end up with more-or-less
dangling references to hub (I say more-or-less because with the devm
allocations, the structures will hang around as zombies for a while).

Relying on the onboard_hub_power_off call to do this for you isn't a
great idea, because the effect won't happen immediately.

> +static int onboard_hub_usbdev_probe(struct usb_device *udev)
> +{
> +	struct device *dev = &udev->dev;
> +	struct onboard_hub *hub;
> +
> +	/* ignore supported hubs without device tree node */
> +	if (!dev->of_node)
> +		return -ENODEV;
> +
> +	hub = _find_onboard_hub(dev);
> +	if (IS_ERR(hub))
> +		return PTR_ERR(dev);
> +
> +	dev_set_drvdata(dev, hub);
> +
> +	onboard_hub_add_usbdev(hub, udev);

Ignoring the return code?  Then why does that routine return int rather
than void?

> +
> +	return 0;
> +}
> +
> +static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
> +{
> +	struct onboard_hub *hub = dev_get_drvdata(&udev->dev);
> +
> +	onboard_hub_remove_usbdev(hub, udev);

Ditto.

> +
> +	put_device(hub->dev);

Is there a matching get_device somewhere (like in _find_onboard_hub)?
If so, I didn't see it.  And I don't see any reason for it.

Alan Stern



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux