In order to preserve previous RTC charging behavior while allowing to
add new charging configurations this series adds the dt property
aux-voltage-chargeable as a uint enum. It supersedes the
trickle-diode-disable flag.
Then the ds1307 driver's charging infrastructure is generalized:
- support charging on 'aux-voltage-chargeable = <1>'
- keep the previous charge default per chip
- make trickle-resistor-ohms optional for charging
- apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionally
This preparatory work allows to enable Epson's RX8130 backup
battery and make it chargeable when 'aux-voltage-chargeable = <1>' is
given.
Regards,
Bastian
Bastian Krause (8):
dt-bindings: rtc: let aux-voltage-chargeable supersede
trickle-diode-disable
dt-bindings: rtc: ds1307: let aux-voltage-chargeable supersede
trickle-diode-disable
dt-bindings: rtc: ds1307: add rx8130 aux-voltage-chargeable support
rtc: ds1307: apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionally
rtc: ds1307: introduce requires_trickle_resistor per chip
rtc: ds1307: store previous charge default per chip
rtc: ds1307: consider aux-voltage-chargeable
rtc: ds1307: enable rx8130's backup battery, make it chargeable
optionally
.../devicetree/bindings/rtc/rtc-ds1307.txt | 9 ++-
.../devicetree/bindings/rtc/rtc.yaml | 10 ++++
drivers/rtc/rtc-ds1307.c | 58 +++++++++++++++++--
3 files changed, 71 insertions(+), 6 deletions(-)
--
2.28.0
