Add DT nodes for DisplayPort and DisplayPort PHY. The DP is Cadence MHDP
8546 and the PHY is a Cadence Torrent PHY with TI WIZ wrapper.
A slight irregularity in the bindings is the DPTX PHY register block,
which is in the MHDP IP, but is needed and mapped by the PHY.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 104 ++++++++++++++++++++++
1 file changed, 104 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 12ceea9b3c9a..82d89dd3faf5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -553,6 +553,82 @@ serdes3: serdes@5030000 {
};
};
+ serdes_wiz4: wiz@5050000 {
+ compatible = "ti,j721e-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&dummy_cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 297 9>;
+ assigned-clock-parents = <&k3_clks 297 10>;
+ assigned-clock-rates = <19200000>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ ranges = <0x5050000 0x0 0x5050000 0x10000>,
+ <0xa030a00 0x0 0xa030a00 0x40>;
+
+ wiz4_pll0_refclk: pll0-refclk {
+ clocks = <&k3_clks 297 9>, <&dummy_cmn_refclk>;
+ clock-output-names = "wiz4_pll0_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz4_pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 297 9>;
+ };
+
+ wiz4_pll1_refclk: pll1-refclk {
+ clocks = <&k3_clks 297 9>, <&dummy_cmn_refclk>;
+ clock-output-names = "wiz4_pll1_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz4_pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 297 9>;
+ };
+
+ wiz4_refclk_dig: refclk-dig {
+ clocks = <&k3_clks 297 9>, <&dummy_cmn_refclk>;
+ clock-output-names = "wiz4_refclk_dig";
+ #clock-cells = <0>;
+ assigned-clocks = <&wiz4_refclk_dig>;
+ assigned-clock-parents = <&k3_clks 297 9>;
+ };
+
+ wiz4_cmn_refclk_dig_div: cmn-refclk-dig-div {
+ clocks = <&wiz4_refclk_dig>;
+ #clock-cells = <0>;
+ };
+
+ wiz4_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+ clocks = <&wiz4_pll1_refclk>;
+ #clock-cells = <0>;
+ };
+
+ serdes4: serdes@5050000 {
+ /*
+ * Note: we also map DPTX PHY registers as the Torrent
+ * needs to manage those.
+ */
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x5050000 0x10000>,
+ <0xa030a00 0x40>; /* DPTX PHY */
+ reg-names = "torrent_phy", "dptx_phy";
+
+ resets = <&serdes_wiz4 0>;
+ reset-names = "torrent_reset";
+ clocks = <&wiz4_pll0_refclk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ torrent_phy_dp: phy@0 {
+ reg = <0>;
+ resets = <&serdes_wiz4 1>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ cdns,num-lanes = <4>;
+ cdns,max-bit-rate = <5400>;
+ #phy-cells = <0>;
+ };
+ };
+ };
+
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
@@ -1024,6 +1100,34 @@ ufs@4e84000 {
};
};
+ mhdp: dp-bridge@a000000 {
+ compatible = "ti,j721e-mhdp8546";
+ /*
+ * Note: we do not map DPTX PHY area, as that is handled by
+ * the PHY driver.
+ */
+ reg = <0x0 0xa000000 0x0 0x30a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */
+ <0x0 0x4f40000 0x0 0x20>; /* DSS_EDP0_INTG_CFG_VP */
+ reg-names = "mhdptx", "j721e-intg";
+
+ status = "disabled";
+
+ clocks = <&k3_clks 151 36>;
+
+ phys = <&torrent_phy_dp>;
+ phy-names = "dpphy";
+
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+
+ dp0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
dss: dss@04a00000 {
compatible = "ti,j721e-dss";
reg =
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
