[PATCH 5/5] pci: controller: dwc: qcom: Harcode PCIe config SID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hardcode the PCIe config SID table value. This is needed to avoid random
MHI failure observed during reboot on SM8250.

Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
[mani: stripped out unnecessary settings and ported for upstream]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index ca8ad354e09d..50748016ce96 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -57,6 +57,7 @@
 #define PCIE20_PARF_SID_OFFSET			0x234
 #define PCIE20_PARF_BDF_TRANSLATE_CFG		0x24C
 #define PCIE20_PARF_DEVICE_TYPE			0x1000
+#define PCIE20_PARF_BDF_TO_SID_TABLE_N		0x2000
 
 #define PCIE20_ELBI_SYS_CTRL			0x04
 #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE		BIT(0)
@@ -1290,6 +1291,9 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	if (ret)
 		goto err;
 
+	writel(0x0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N);
+	writel(0x01000100, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + 0x054);
+
 	return 0;
 err:
 	qcom_ep_reset_assert(pcie);
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux