[PATCH 05/10] dt-bindings: remoteproc: qcom,q6v5: Deprecate regulators for PDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Newer platforms vote for necessary power domains through the power
domain subsystem. For historical reasons older platforms like MSM8916
or MSM8974 still control these as regulators.

Managing them as power domains is preferred since that allows us
to vote for corners instead of raw voltages. Document that those
should be specified as power domains and deprecate using them
through the regulator interface.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 .../devicetree/bindings/remoteproc/qcom,q6v5.txt     | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 1f9a62e13ebe..7ccd5534b0ae 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -113,8 +113,8 @@ should be referenced as follows:
 For the compatible strings below the following supplies are required:
   "qcom,q6v5-pil"
   "qcom,msm8916-mss-pil",
-- cx-supply:
-- mx-supply:
+- cx-supply: (deprecated, use power domain instead)
+- mx-supply: (deprecated, use power domain instead)
 - pll-supply:
 	Usage: required
 	Value type: <phandle>
@@ -123,9 +123,9 @@ For the compatible strings below the following supplies are required:
 
 For the compatible string below the following supplies are required:
   "qcom,msm8974-mss-pil"
-- cx-supply:
+- cx-supply: (deprecated, use power domain instead)
 - mss-supply:
-- mx-supply:
+- mx-supply: (deprecated, use power domain instead)
 - pll-supply:
 	Usage: required
 	Value type: <phandle>
@@ -149,11 +149,11 @@ For the compatible string below the following supplies are required:
 	Usage: required
 	Value type: <stringlist>
 	Definition: The power-domains needed depend on the compatible string:
-	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
+		    no power-domain names required
+	qcom,q6v5-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
-		    no power-domain names required
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
-- 
2.28.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux