Re: [PATCH 05/36] mtd: nand: omap: Move IRQ handling from GPMC to NAND driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




* Roger Quadros <rogerq@xxxxxx> [140611 01:58]:
> Since the Interrupt Events are used only by the NAND driver,
> there is no point in managing the Interrupt registers
> in the GPMC driver and complicating it with irqchip modeling.
> 
> Let's manage the interrupt registers directly in the NAND driver
> and get rid of irqchip model from GPMC driver.
> 
> Get rid of IRQ commands and unused commands from gpmc_configure() in
> the GPMC driver.

This seems like a step backward to me. The GPMC interrupt enable
register can do edge detection on the wait pins, how is that
limited to NAND?

Further, let's not start mixing GPMC hardware module register
access with the NAND driver register access. They can be clocked
separately. And bugs in the NAND driver can cause issues in other
GPMC using drivers.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux