On 9/14/20 11:22 AM, Lokesh Vutla wrote: > To allow lesser dependency and better maintainability use CONFIG_ARCH_K3 > for building dtbs for all K3 based devices. This is as per the > discussion in [0]. > > [0] https://lore.kernel.org/linux-arm-kernel/20200908112534.t5bgrjf7y3a6l2ss@akan/ > > Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx> Reviewed-by: Suman Anna <s-anna@xxxxxx> regards Suman > --- > arch/arm64/boot/dts/ti/Makefile | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile > index 05c0bebf65d4..7f28be62b8da 100644 > --- a/arch/arm64/boot/dts/ti/Makefile > +++ b/arch/arm64/boot/dts/ti/Makefile > @@ -3,9 +3,9 @@ > # Make file to build device tree binaries for boards based on > # Texas Instruments Inc processors > # > -# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ > +# Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ > # > > -dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb > +dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb > > -dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb > +dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb >
