Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".
Signed-off-by: Michael Walle <michael@xxxxxxxx>
Acked-by: Pavel Machek <pavel@xxxxxx>
---
Changes since v9:
- none
Changes since v8:
- none
Changes since v7:
- use new "function" and "color" properties instead of a label
- added default-on trigger for the power-led
Changes since v6:
- none
Changes since v5:
- changed the label, suggested by Pavel Machek
Changes since v4:
- none
Changes since v3:
- see cover letter
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 4b4cc6a1573d..dd516c0efd8b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -11,11 +11,29 @@
/dts-v1/;
#include "fsl-ls1028a-kontron-sl28-var4.dts"
+#include <dt-bindings/leds/common.h>
/ {
model = "Kontron KBox A-230-LS";
compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
"kontron,sl28", "fsl,ls1028a";
+
+ leds {
+ compatible = "gpio-leds";
+
+ alarm-led {
+ function = LED_FUNCTION_ALARM;
+ color = <LED_COLOR_ID_YELLOW>;
+ gpios = <&sl28cpld_gpio0 0 0>;
+ };
+
+ power-led {
+ linux,default-trigger = "default-on";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&sl28cpld_gpio1 3 0>;
+ };
+ };
};
&enetc_mdio_pf3 {
--
2.20.1
