On 21:52-20200908, Lokesh Vutla wrote:
[...]
Few minor comments below.. (I dont have any further comments beyond
these) I had missed taking a diff against j721e and what downstream
vendor kernel.
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> new file mode 100644
> index 000000000000..ed5f419bc86d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> @@ -0,0 +1,199 @@
[...]
> + gic500: interrupt-controller@1800000 {
> + compatible = "arm,gic-v3";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
> + <0x00 0x01900000 0x00 0x100000>; /* GICR */
> +
> + /* vcpumntirq: virtual CPU interface maintenance interrupt */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> + gic_its: msi-controller@1820000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x00 0x01820000 0x00 0x10000>;
> + socionext,synquacer-pre-its = <0x1000000 0x400000>;
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + main_navss: navss@30000000 {
hmm.. bus@ just to simplify things? or I wonder if a better common term is available?
I cant find a better alternative when I look at
https://github.com/devicetree-org/devicetree-specification/blob/v0.3/source/devicetree-basics.rst
> + compatible = "simple-mfd";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
> +
> + secure_proxy_main: mailbox@32c00000 {
> + compatible = "ti,am654-secure-proxy";
> + #mbox-cells = <1>;
> + reg-names = "target_data", "rt", "scfg";
> + reg = <0x00 0x32c00000 0x00 0x100000>,
> + <0x00 0x32400000 0x00 0x100000>,
> + <0x00 0x32800000 0x00 0x100000>;
> + interrupt-names = "rx_011";
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + };
I think we could introduce base infrastructure stuff like intr and
inta nodes here? Also, the gpio_intr?
> + };
> +
> + main_pmx0: pinmux@11c000 {
pinctrl@ ?
[...]
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> new file mode 100644
> index 000000000000..76ef75586077
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +
[...]
> + wkup_pmx0: pinmux@4301c000 {
pinctrl@ ?
> + compatible = "pinctrl-single";
> + /* Proxy 0 addressing */
> + reg = <0x00 0x4301c000 0x00 0x178>;
> + #pinctrl-cells = <1>;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0xffffffff>;
> + };
> +
> + mcu_ram: sram@41c00000 {
> + compatible = "mmio-sram";
> + reg = <0x00 0x41c00000 0x00 0x100000>;
> + ranges = <0x00 0x00 0x41c00000 0x100000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
wkup_gpio_intr same argument as "core infrastructure" ?
> +
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
> new file mode 100644
> index 000000000000..7c337780adb6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J7200 SoC Family
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/k3.h>
> +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +/ {
> + model = "Texas Instruments K3 J7200 SoC";
> + compatible = "ti,j7200";
> + interrupt-parent = <&gic500>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &wkup_uart0;
> + serial1 = &mcu_uart0;
> + serial2 = &main_uart0;
> + serial3 = &main_uart1;
> + serial4 = &main_uart2;
> + serial5 = &main_uart3;
> + serial6 = &main_uart4;
> + serial7 = &main_uart5;
> + serial8 = &main_uart6;
> + serial9 = &main_uart7;
> + serial10 = &main_uart8;
> + serial11 = &main_uart9;
> + };
> +
might be nice to leave a chosen { }; here to indicate board
files fill it up.. just to maintain consistency with rest of SoC dtsis?
[...]
> +
> + cbass_main: bus@100000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
> + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
> + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
> + <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
> + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
> + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
> + <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */
> +
> + /* MCUSS_WKUP Range */
> + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
> + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
> + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
> + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
> + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
> + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
> + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
> + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
> + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
> + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
> + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>;
> +
> + cbass_mcu_wakeup: bus@28380000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
> + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
> + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
> + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
> + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
> + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
> + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
> + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
> + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
> + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
> + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; /* FSS OSPI0/1 data region 0 */
> + };
> + };
> +};
We covered these already.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
