Convert the DT binding over to Json-schema. Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx> --- V3: New patch. .../devicetree/bindings/mailbox/arm,mhu.yaml | 86 +++++++++++++++++++ .../devicetree/bindings/mailbox/arm-mhu.txt | 43 ---------- 2 files changed, 86 insertions(+), 43 deletions(-) create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhu.yaml delete mode 100644 Documentation/devicetree/bindings/mailbox/arm-mhu.txt diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml new file mode 100644 index 000000000000..4e840cedb2e4 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHU Mailbox Controller + +maintainers: + - Jassi Brar <jaswinder.singh@xxxxxxxxxx> + +description: | + The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 + independent channels/links to communicate with remote processor(s). MHU links + are hardwired on a platform. A link raises interrupt for any received data. + However, there is no specified way of knowing if the sent data has been read + by the remote. This driver assumes the sender polls STAT register and the + remote clears it after having read the data. The last channel is specified to + be a 'Secure' resource, hence can't be used by Linux running NS. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + const: arm,mhu + required: + - compatible + +properties: + compatible: + items: + - const: arm,mhu + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + description: | + Interrupt information corresponding to each of the 3 links of MHU, + low-priority non-secure, high-priority non-secure, and secure. + maxItems: 3 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + '#mbox-cells': + description: Index of the channel. + const: 1 + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuA: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client_scb: scb@2e000000 { + compatible = "fujitsu,mb86s70-scb-1.0"; + reg = <0 0x2e000000 0 0x4000>; + mboxes = <&mhuA 1>; /* HP-NonSecure */ + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt deleted file mode 100644 index 4971f03f0b33..000000000000 --- a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt +++ /dev/null @@ -1,43 +0,0 @@ -ARM MHU Mailbox Driver -====================== - -The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has -3 independent channels/links to communicate with remote processor(s). - MHU links are hardwired on a platform. A link raises interrupt for any -received data. However, there is no specified way of knowing if the sent -data has been read by the remote. This driver assumes the sender polls -STAT register and the remote clears it after having read the data. -The last channel is specified to be a 'Secure' resource, hence can't be -used by Linux running NS. - -Mailbox Device Node: -==================== - -Required properties: --------------------- -- compatible: Shall be "arm,mhu" & "arm,primecell" -- reg: Contains the mailbox register address range (base - address and length) -- #mbox-cells Shall be 1 - the index of the channel needed. -- interrupts: Contains the interrupt information corresponding to - each of the 3 links of MHU. - -Example: --------- - - mhu: mailbox@2b1f0000 { - #mbox-cells = <1>; - compatible = "arm,mhu", "arm,primecell"; - reg = <0 0x2b1f0000 0x1000>; - interrupts = <0 36 4>, /* LP-NonSecure */ - <0 35 4>, /* HP-NonSecure */ - <0 37 4>; /* Secure */ - clocks = <&clock 0 2 1>; - clock-names = "apb_pclk"; - }; - - mhu_client: scb@2e000000 { - compatible = "fujitsu,mb86s70-scb-1.0"; - reg = <0 0x2e000000 0x4000>; - mboxes = <&mhu 1>; /* HP-NonSecure */ - }; -- 2.25.0.rc1.19.g042ed3e048af
