Re: [PATCH 4/7] cpufreq: qcom-hw: Make use of of_match data for offsets and row size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 8, 2020 at 1:27 PM Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
>
> For preparing the driver to handle further SoC revisions, let's use the
> of_match data for getting the device specific offsets and row size instead
> of defining them globally.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>



> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 96 +++++++++++++++++++++----------
>  1 file changed, 66 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index ccea34f61152..41853db7c9b8 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -19,15 +19,21 @@
>  #define LUT_L_VAL                      GENMASK(7, 0)
>  #define LUT_CORE_COUNT                 GENMASK(18, 16)
>  #define LUT_VOLT                       GENMASK(11, 0)
> -#define LUT_ROW_SIZE                   32
>  #define CLK_HW_DIV                     2
>  #define LUT_TURBO_IND                  1
>
> -/* Register offsets */
> -#define REG_ENABLE                     0x0
> -#define REG_FREQ_LUT                   0x110
> -#define REG_VOLT_LUT                   0x114
> -#define REG_PERF_STATE                 0x920
> +struct qcom_cpufreq_soc_data {
> +       u32 reg_enable;
> +       u32 reg_freq_lut;
> +       u32 reg_volt_lut;
> +       u32 reg_perf_state;
> +       u8 lut_row_size;
> +};
> +
> +struct qcom_cpufreq_data {
> +       void __iomem *base;
> +       const struct qcom_cpufreq_soc_data *soc_data;
> +};
>
>  static unsigned long cpu_hw_rate, xo_rate;
>  static bool icc_scaling_enabled;
> @@ -76,10 +82,11 @@ static int qcom_cpufreq_update_opp(struct device *cpu_dev,
>  static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
>                                         unsigned int index)
>  {
> -       void __iomem *perf_state_reg = policy->driver_data;
> +       struct qcom_cpufreq_data *data = policy->driver_data;
> +       const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
>         unsigned long freq = policy->freq_table[index].frequency;
>
> -       writel_relaxed(index, perf_state_reg);
> +       writel_relaxed(index, data->base + soc_data->reg_perf_state);
>
>         if (icc_scaling_enabled)
>                 qcom_cpufreq_set_bw(policy, freq);
> @@ -91,7 +98,8 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
>
>  static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
>  {
> -       void __iomem *perf_state_reg;
> +       struct qcom_cpufreq_data *data;
> +       const struct qcom_cpufreq_soc_data *soc_data;
>         struct cpufreq_policy *policy;
>         unsigned int index;
>
> @@ -99,9 +107,10 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
>         if (!policy)
>                 return 0;
>
> -       perf_state_reg = policy->driver_data;
> +       data = policy->driver_data;
> +       soc_data = data->soc_data;
>
> -       index = readl_relaxed(perf_state_reg);
> +       index = readl_relaxed(data->base + soc_data->reg_perf_state);
>         index = min(index, LUT_MAX_ENTRIES - 1);
>
>         return policy->freq_table[index].frequency;
> @@ -110,12 +119,13 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
>  static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
>                                                 unsigned int target_freq)
>  {
> -       void __iomem *perf_state_reg = policy->driver_data;
> +       struct qcom_cpufreq_data *data = policy->driver_data;
> +       const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
>         unsigned int index;
>         unsigned long freq;
>
>         index = policy->cached_resolved_idx;
> -       writel_relaxed(index, perf_state_reg);
> +       writel_relaxed(index, data->base + soc_data->reg_perf_state);
>
>         freq = policy->freq_table[index].frequency;
>         arch_set_freq_scale(policy->related_cpus, freq,
> @@ -125,8 +135,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
>  }
>
>  static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
> -                                   struct cpufreq_policy *policy,
> -                                   void __iomem *base)
> +                                   struct cpufreq_policy *policy)
>  {
>         u32 data, src, lval, i, core_count, prev_freq = 0, freq;
>         u32 volt;
> @@ -134,6 +143,8 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
>         struct dev_pm_opp *opp;
>         unsigned long rate;
>         int ret;
> +       struct qcom_cpufreq_data *drv_data = policy->driver_data;
> +       const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data;
>
>         table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
>         if (!table)
> @@ -160,14 +171,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
>         }
>
>         for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> -               data = readl_relaxed(base + REG_FREQ_LUT +
> -                                     i * LUT_ROW_SIZE);
> +               data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut +
> +                                     i * soc_data->lut_row_size);
>                 src = FIELD_GET(LUT_SRC, data);
>                 lval = FIELD_GET(LUT_L_VAL, data);
>                 core_count = FIELD_GET(LUT_CORE_COUNT, data);
>
> -               data = readl_relaxed(base + REG_VOLT_LUT +
> -                                     i * LUT_ROW_SIZE);
> +               data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut +
> +                                     i * soc_data->lut_row_size);
>                 volt = FIELD_GET(LUT_VOLT, data) * 1000;
>
>                 if (src)
> @@ -237,6 +248,20 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
>         }
>  }
>
> +static const struct qcom_cpufreq_soc_data qcom_soc_data = {

rename this to sdm845_soc_data?

Or even better, maybe just use the IP version number for this IP block
so that all SoCs using that IP version can use this struct?

> +       .reg_enable = 0x0,
> +       .reg_freq_lut = 0x110,
> +       .reg_volt_lut = 0x114,
> +       .reg_perf_state = 0x920,
> +       .lut_row_size = 32,
> +};
> +
> +static const struct of_device_id qcom_cpufreq_hw_match[] = {
> +       { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
> +       {}
> +};
> +MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
> +
>  static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
>  {
>         struct platform_device *pdev = cpufreq_get_driver_data();
> @@ -246,6 +271,8 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
>         struct device *cpu_dev;
>         struct resource *res;
>         void __iomem *base;
> +       struct qcom_cpufreq_data *data;
> +       const struct of_device_id *match;
>         int ret, index;
>
>         cpu_dev = get_cpu_device(policy->cpu);
> @@ -275,8 +302,23 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
>         if (!base)
>                 return -ENOMEM;
>
> +       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +       if (!data) {
> +               ret = -ENOMEM;
> +               goto error;
> +       }
> +
> +       match = of_match_device(qcom_cpufreq_hw_match, &pdev->dev);
> +       if (!match) {
> +               ret = -ENODEV;
> +               goto error;
> +       }
> +
> +       data->soc_data = match->data;
> +       data->base = base;
> +
>         /* HW should be in enabled state to proceed */
> -       if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) {
> +       if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
>                 dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
>                 ret = -ENODEV;
>                 goto error;
> @@ -289,9 +331,9 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
>                 goto error;
>         }
>
> -       policy->driver_data = base + REG_PERF_STATE;
> +       policy->driver_data = data;
>
> -       ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy, base);
> +       ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
>         if (ret) {
>                 dev_err(dev, "Domain-%d failed to read LUT\n", index);
>                 goto error;
> @@ -315,13 +357,13 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
>  static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
>  {
>         struct device *cpu_dev = get_cpu_device(policy->cpu);
> -       void __iomem *base = policy->driver_data - REG_PERF_STATE;
> +       struct qcom_cpufreq_data *data = policy->driver_data;
>         struct platform_device *pdev = cpufreq_get_driver_data();
>
>         dev_pm_opp_remove_all_dynamic(cpu_dev);
>         dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
>         kfree(policy->freq_table);
> -       devm_iounmap(&pdev->dev, base);
> +       devm_iounmap(&pdev->dev, data->base);
>
>         return 0;
>  }
> @@ -391,12 +433,6 @@ static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
>         return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
>  }
>
> -static const struct of_device_id qcom_cpufreq_hw_match[] = {
> -       { .compatible = "qcom,cpufreq-hw" },
> -       {}
> -};
> -MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
> -
>  static struct platform_driver qcom_cpufreq_hw_driver = {
>         .probe = qcom_cpufreq_hw_driver_probe,
>         .remove = qcom_cpufreq_hw_driver_remove,
> --
> 2.17.1
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux