Re: [PATCH] arm64: dts: sdm845: Fixup OPP table for all qup devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 31, 2020 at 9:04 PM John Stultz <john.stultz@xxxxxxxxxx> wrote:
> On Wed, Aug 12, 2020 at 3:23 AM Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> wrote:
> > This OPP table was based on the clock VDD-FMAX tables seen in
> > downstream code, however it turns out the downstream clock
> > driver does update these tables based on later/production
> > rev of the chip and whats seen in the tables belongs to an
> > early engineering rev of the SoC.
> > Fix up the OPP tables such that it now matches with the
> > production rev of sdm845 SoC.
> >
> > Fixes: 13cadb34e593 ("arm64: dts: sdm845: Add OPP table for all qup
> > devices")
> > Reported-by: John Stultz <john.stultz@xxxxxxxxxx>
> > Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> > ---
>
> Just wanted to follow up on this, as it's still missing from 5.9-rc3
> and is needed to fix a bluetooth regression on db845c from 5.9-rc1.
>
> Amit has already validated it (on PocoF1 as well), but just in case its useful:
> Tested-by: John Stultz <john.stultz@xxxxxxxxxx>

Hey Everyone,
  Just wanted to nag folks on this again as it is still missing from
upstream and resolves a bluetooth regression from 5.9-rc1.

thanks
-john



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux