On 04/09/2020 01:26, Jonathan Marek wrote:
Add display clock drivers required to get DSI and DP displays working on
SM8150 and SM8250 SoCs.
Derived from downstream drivers. Notable changes compared to downstream:
- EDP clks removed (nothing uses these even in downstream it seems)
- freq_tbl values for dp_link clk is in Hz and not kHz
On SM8250:
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
v2:
- updated dts example to reflect the change (first patch)
- updated config_ctl_hi1_val in sm8250 dispcc to latest downstream
Jonathan Marek (7):
dt-bindings: clock: sdm845-dispcc: same name for dp_phy clocks as
sc7180
arm64: dts: qcom: sdm845-dispcc: same name for dp_phy clocks as sc7180
dt-bindings: clock: combine qcom,sdm845-dispcc and qcom,sc7180-dispcc
dt-bindings: clock: Introduce QCOM SM8150 display clock bindings
dt-bindings: clock: Introduce QCOM SM8250 display clock bindings
clk: qcom: Add display clock controller driver for SM8150
clk: qcom: Add display clock controller driver for SM8250
...om,sdm845-dispcc.yaml => qcom,dispcc.yaml} | 30 +-
.../bindings/clock/qcom,sc7180-dispcc.yaml | 86 --
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +-
drivers/clk/qcom/Kconfig | 18 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/dispcc-sm8150.c | 1152 +++++++++++++++++
drivers/clk/qcom/dispcc-sm8250.c | 1100 ++++++++++++++++
.../dt-bindings/clock/qcom,dispcc-sm8150.h | 69 +
.../dt-bindings/clock/qcom,dispcc-sm8250.h | 66 +
9 files changed, 2428 insertions(+), 99 deletions(-)
rename Documentation/devicetree/bindings/clock/{qcom,sdm845-dispcc.yaml => qcom,dispcc.yaml} (75%)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
create mode 100644 drivers/clk/qcom/dispcc-sm8150.c
create mode 100644 drivers/clk/qcom/dispcc-sm8250.c
create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8250.h
--
With best wishes
Dmitry
