From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Renamed the file to reflect the only compatible.
Added #io-channel-cells to make it easier to support consumers of the
ADC channels this device provides.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Tomer Maimon <tmaimon77@xxxxxxxxx>
---
.../bindings/iio/adc/nuvoton,npcm-adc.txt | 26 --------
.../bindings/iio/adc/nuvoton,npcm750-adc.yaml | 64 +++++++++++++++++++
2 files changed, 64 insertions(+), 26 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
deleted file mode 100644
index ef8eeec1a997..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Nuvoton NPCM Analog to Digital Converter (ADC)
-
-The NPCM ADC is a 10-bit converter for eight channel inputs.
-
-Required properties:
-- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
-- reg: specifies physical base address and size of the registers.
-- interrupts: Contain the ADC interrupt with flags for falling edge.
-- resets : phandle to the reset control for this device.
-
-Optional properties:
-- clocks: phandle of ADC reference clock, in case the clock is not
- added the ADC will use the default ADC sample rate.
-- vref-supply: The regulator supply ADC reference voltage, in case the
- vref-supply is not added the ADC will use internal voltage
- reference.
-
-Example:
-
-adc: adc@f000c000 {
- compatible = "nuvoton,npcm750-adc";
- reg = <0xf000c000 0x8>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk NPCM7XX_CLK_ADC>;
- resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
new file mode 100644
index 000000000000..59382e2805d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,npcm750-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM BMC Analog to Digital Converter (ADC)
+
+maintainers:
+ - Tomer Maimon <tmaimon77@xxxxxxxxx>
+
+description:
+ The NPCM ADC is a 10-bit converter for eight channel inputs.
+
+properties:
+ compatible:
+ const: nuvoton,npcm750-adc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: ADC interrupt, should be set for falling edge.
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: If not provided the defulat ADC sample rate will be used.
+
+ vref-supply:
+ description: If not supplied, the internal voltage reference will be used.
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ adc@f000c000 {
+ compatible = "nuvoton,npcm750-adc";
+ reg = <0xf000c000 0x8>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_ADC>;
+ resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+ };
+ };
+...
--
2.28.0
