> -----Original Message-----
> From: Borislav Petkov <bp@xxxxxxxxx>
> Sent: 31 August 2020 14:22
> To: Yash Shah <yash.shah@xxxxxxxxxxxx>
> Cc: robh+dt@xxxxxxxxxx; palmer@xxxxxxxxxxx; Paul Walmsley ( Sifive)
> <paul.walmsley@xxxxxxxxxx>; mchehab@xxxxxxxxxx; tony.luck@xxxxxxxxx;
> aou@xxxxxxxxxxxxxxxxx; james.morse@xxxxxxx; rrichter@xxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-riscv@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-edac@xxxxxxxxxxxxxxx; Sachin Ghadi
> <sachin.ghadi@xxxxxxxxxxxx>
> Subject: Re: [PATCH 3/3] edac: sifive: Add EDAC support for Memory
> Controller in SiFive SoCs
>
> [External Email] Do not click links or attachments unless you recognize the
> sender and know the content is safe
>
> > Subject: Re: [PATCH 3/3] edac: sifive: Add EDAC support for Memory
> > Controller in SiFive SoCs
>
> Fix subject prefix: "EDAC/sifive: ..."
>
> On Tue, Aug 25, 2020 at 05:36:22PM +0530, Yash Shah wrote:
> > Add Memory controller EDAC support in exisiting SiFive platform EDAC
>
> s/in exisiting/to the/
>
> > driver. It registers for notifier events from the SiFive DDR
> > controller driver for DDR ECC events.
>
> Simplify:
>
> "It registers for ECC notifier events from the memory controller."
>
> > Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
> > ---
> > drivers/edac/Kconfig | 2 +-
> > drivers/edac/sifive_edac.c | 117
> > +++++++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 118 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index
> > 7b6ec30..f8b3b53 100644
> > --- a/drivers/edac/Kconfig
> > +++ b/drivers/edac/Kconfig
> > @@ -462,7 +462,7 @@ config EDAC_ALTERA_SDMMC
> >
> > config EDAC_SIFIVE
> > bool "Sifive platform EDAC driver"
> > - depends on EDAC=y && SIFIVE_L2
> > + depends on EDAC=y && (SIFIVE_L2 || SIFIVE_DDR)
> > help
> > Support for error detection and correction on the SiFive SoCs.
> >
> > diff --git a/drivers/edac/sifive_edac.c b/drivers/edac/sifive_edac.c
> > index 3a3dcb1..cf032685 100644
> > --- a/drivers/edac/sifive_edac.c
> > +++ b/drivers/edac/sifive_edac.c
> > @@ -11,14 +11,120 @@
> > #include <linux/platform_device.h>
> > #include "edac_module.h"
> > #include <soc/sifive/sifive_l2_cache.h>
> > +#include <soc/sifive/sifive_ddr.h>
> >
> > #define DRVNAME "sifive_edac"
> > +#define SIFIVE_EDAC_MOD_NAME "Sifive ECC Manager"
>
> s/SIFIVE_EDAC_MOD_NAME/EDAC_MOD_NAME/g
>
> like the other EDAC drivers.
>
Sure, will make all the above suggested textual changes in v2.
> ...
>
> > +static int ecc_mc_register(struct platform_device *pdev) {
> > + struct sifive_edac_mc_priv *p;
> > + struct edac_mc_layer layers[1];
> > + int ret;
> > +
> > + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> > + if (!p)
> > + return -ENOMEM;
> > +
> > + p->notifier.notifier_call = ecc_mc_err_event;
> > + platform_set_drvdata(pdev, p);
> > +
> > + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
> > + layers[0].size = 1;
> > + layers[0].is_virt_csrow = true;
> > +
> > + p->mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
> > + if (!p->mci) {
> > + dev_err(&pdev->dev, "Failed mem allocation for mc instance\n");
> > + return -ENOMEM;
> > + }
> > +
> > + p->mci->pdev = &pdev->dev;
> > + /* Initialize controller capabilities */
> > + p->mci->mtype_cap = MEM_FLAG_DDR4;
> > + p->mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
> > + p->mci->edac_cap = EDAC_FLAG_SECDED;
> > + p->mci->scrub_cap = SCRUB_UNKNOWN;
> > + p->mci->scrub_mode = SCRUB_HW_PROG;
> > + p->mci->ctl_name = dev_name(&pdev->dev);
> > + p->mci->dev_name = dev_name(&pdev->dev);
> > + p->mci->mod_name = SIFIVE_EDAC_MOD_NAME;
> > + p->mci->ctl_page_to_phys = NULL;
> > +
> > + /* Interrupt feature is supported by cadence mc */
> > + edac_op_state = EDAC_OPSTATE_INT;
> > +
> > + ret = edac_mc_add_mc(p->mci);
> > + if (ret) {
> > + edac_printk(KERN_ERR, SIFIVE_EDAC_MOD_NAME,
> > + "Failed to register with EDAC core\n");
> > + goto err;
> > + }
> > +
> > +#ifdef CONFIG_SIFIVE_DDR
>
> It seems all that ifdeffery can be replaced with
>
> if (IS_ENABLED(CONFIG_...))
Yes, will replace all the ifdeffery in v2
Thanks for the review.
- Yash
>
> Thx.
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
