Hi Vinod,
Thanks for the review comments.
On 8/25/2020 7:21 PM, Vinod Koul wrote:
On 18-08-20, 15:00, Reddy, MallikarjunaX wrote:
+
+ intel,chans:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The channels included on this port. Format is channel start
+ number and how many channels on this port.
Why does this need to be in DT? This all seems like it can be in the dma
cells for each client.
(*ABC)
Yes. We need this.
for dma0(lgm-cdma) old SOC supports 16 channels and the new SOC supports 22
channels. and the logical channel mapping for the peripherals also differ
b/w old and new SOCs.
Because of this hardware limitation we are trying to configure the total
channels and port-channel mapping dynamically from device tree.
based on port name we are trying to configure the default values for
different peripherals(ports).
Example: burst length is not same for all ports, so using port name to do
default configurations.
Sorry that does not make sense to me, why not specify the values to be
used here instead of defining your own name scheme!
OK. Agreed. I will remove port name from DT and only use intel,chans
Only older soc it should create 16 channels and new 22 (hint this is hw
description so perfectly okay to specify in DT or in using driver_data
and compatible for each version
+
+ required:
+ - reg
+ - intel,name
+ - intel,chans
+
+
+ ldma-channels:
+ type: object
+ description:
+ This sub-node must contain a sub-node for each DMA channel.
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "^ldma-channels@[0-15]+$":
+ type: object
+
+ properties:
+ reg:
+ items:
+ - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+ description:
+ Which channel this node refers to.
+
+ intel,desc_num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Per channel maximum descriptor number. The max value is 255.
+
+ intel,hdr-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The first parameter is header mode size, the second
+ parameter is checksum enable or disable. If enabled,
+ header mode size is ignored. If disabled, header mode
+ size must be provided.
+
+ intel,hw-desc:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Per channel dma hardware descriptor configuration.
+ The first parameter is descriptor physical address and the
+ second parameter hardware descriptor number.
Again, this all seems like per client information for dma cells.
Ok, if we move all these attributes to 'dmas' then 'dma-channels' child
node is not needed in dtsi.
#dma-cells number i am already using 7. If we move all these attributes to
'dmas' then integer cells will increase.
Is there any limitation in using a number of integer cells & as determined
by the #dma-cells property?
No I dont think there is but it needs to make sense :-)
OK.
