Add a new driver for supporting Xilinx platforms. This driver handles
the USB 3.0 PHY initialization and PIPE control & reset operations for
ZynqMP platforms. This also handles the USB 2.0 PHY initialization and
reset operations for Versal platforms.
Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
---
drivers/usb/dwc3/Kconfig | 8 +
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-of-simple.c | 1 -
drivers/usb/dwc3/dwc3-xilinx.c | 416 ++++++++++++++++++++++++++++++
4 files changed, 425 insertions(+), 1 deletion(-)
create mode 100644 drivers/usb/dwc3/dwc3-xilinx.c
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 7a2304565a73..416063ee9d05 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -139,4 +139,12 @@ config USB_DWC3_QCOM
for peripheral mode support.
Say 'Y' or 'M' if you have one such device.
+config USB_DWC3_XILINX
+ tristate "Xilinx Platforms"
+ depends on (ARCH_ZYNQMP || ARCH_VERSAL) && OF
+ default USB_DWC3
+ help
+ Support Xilinx SoCs with DesignWare Core USB3 IP.
+ Say 'Y' or 'M' if you have one such device.
+
endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index ae86da0dc5bd..add567578b1f 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -51,3 +51,4 @@ obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
+obj-$(CONFIG_USB_DWC3_XILINX) += dwc3-xilinx.o
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 7df115012935..e3a485b76818 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -172,7 +172,6 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "rockchip,rk3399-dwc3" },
- { .compatible = "xlnx,zynqmp-dwc3" },
{ .compatible = "cavium,octeon-7130-usb-uctl" },
{ .compatible = "sprd,sc9860-dwc3" },
{ .compatible = "allwinner,sun50i-h6-dwc3" },
diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
new file mode 100644
index 000000000000..272906797a7a
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * dwc3-xilinx.c - Xilinx DWC3 controller specific glue driver
+ *
+ * Authors: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>
+ * Manish Narani <manish.narani@xxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/io.h>
+
+#include <linux/phy/phy.h>
+
+/* USB phy reset mask register */
+#define XLNX_USB_PHY_RST 0x001C
+#define XLNX_PHY_RST_MASK 0x1
+
+/* Xilinx USB 3.0 IP Register */
+#define XLNX_USB_COHERENCY 0x005C
+#define XLNX_USB_COHERENCY_ENABLE 0x1
+
+/* Versal USB Reset ID */
+#define VERSAL_USB_RESET_ID 0xC104036
+
+#define PIPE_CLK_OFFSET 0x7c
+#define PIPE_CLK_ON 1
+#define PIPE_CLK_OFF 0
+#define PIPE_POWER_OFFSET 0x80
+#define PIPE_POWER_ON 1
+#define PIPE_POWER_OFF 0
+
+#define RST_TIMEOUT 1000
+
+struct dwc3_xlnx {
+ int num_clocks;
+ struct clk_bulk_data *clks;
+ struct device *dev;
+ void __iomem *regs;
+ struct dwc3 *dwc;
+ struct phy *phy;
+ struct phy *usb3_phy;
+ struct reset_control *crst;
+ struct reset_control *hibrst;
+ struct reset_control *apbrst;
+};
+
+static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask)
+{
+ u32 reg;
+
+ reg = readl(priv_data->regs + XLNX_USB_PHY_RST);
+
+ if (mask)
+ /*
+ * Mask the phy reset signal from comtroller
+ * reaching ULPI phy. This can be done by
+ * writing 0 into usb2_phy_reset register
+ */
+ reg &= ~XLNX_PHY_RST_MASK;
+ else
+ /*
+ * Allow phy reset signal from controller to
+ * reset ULPI phy. This can be done by writing
+ * 0x1 into usb2_phy_reset register
+ */
+ reg |= XLNX_PHY_RST_MASK;
+
+ writel(reg, priv_data->regs + XLNX_USB_PHY_RST);
+}
+
+static int dwc3_xlnx_rst_assert(struct reset_control *rstc)
+{
+ unsigned long loop_time = msecs_to_jiffies(RST_TIMEOUT);
+ unsigned long timeout;
+
+ reset_control_assert(rstc);
+
+ /* wait until reset is asserted or timeout */
+ timeout = jiffies + loop_time;
+
+ while (!time_after_eq(jiffies, timeout)) {
+ if (reset_control_status(rstc) > 0)
+ return 0;
+
+ cpu_relax();
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int dwc3_xlnx_rst_deassert(struct reset_control *rstc)
+{
+ unsigned long loop_time = msecs_to_jiffies(RST_TIMEOUT);
+ unsigned long timeout;
+
+ reset_control_deassert(rstc);
+
+ /* wait until reset is de-asserted or timeout */
+ timeout = jiffies + loop_time;
+ while (!time_after_eq(jiffies, timeout)) {
+ if (!reset_control_status(rstc))
+ return 0;
+
+ cpu_relax();
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data)
+{
+ struct device *dev = priv_data->dev;
+ int ret;
+
+ dwc3_xlnx_mask_phy_rst(priv_data, false);
+
+ /* Assert and De-assert reset */
+ ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID,
+ PM_RESET_ACTION_ASSERT);
+ if (ret < 0) {
+ dev_err(dev, "failed to assert Reset\n");
+ return ret;
+ }
+
+ ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID,
+ PM_RESET_ACTION_RELEASE);
+ if (ret < 0) {
+ dev_err(dev, "failed to De-assert Reset\n");
+ return ret;
+ }
+
+ dwc3_xlnx_mask_phy_rst(priv_data, true);
+
+ return 0;
+}
+
+static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
+{
+ struct device *dev = priv_data->dev;
+ int ret;
+ u32 reg;
+
+ priv_data->crst = devm_reset_control_get(dev, "usb_crst");
+ if (IS_ERR(priv_data->crst)) {
+ dev_err(dev, "failed to get %s reset signal\n", "usb_crst");
+ ret = PTR_ERR(priv_data->crst);
+ goto err;
+ }
+
+ priv_data->hibrst = devm_reset_control_get(dev, "usb_hibrst");
+ if (IS_ERR(priv_data->hibrst)) {
+ dev_err(dev, "failed to get %s reset signal\n", "usb_hibrst");
+ ret = PTR_ERR(priv_data->hibrst);
+ goto err;
+ }
+
+ priv_data->apbrst = devm_reset_control_get(dev, "usb_apbrst");
+ if (IS_ERR(priv_data->apbrst)) {
+ dev_err(dev, "failed to get %s reset signal\n", "usb_apbrst");
+ ret = PTR_ERR(priv_data->apbrst);
+ goto err;
+ }
+
+ priv_data->usb3_phy = devm_phy_get(dev, "usb3-phy");
+
+ ret = dwc3_xlnx_rst_assert(priv_data->crst);
+ if (ret < 0) {
+ dev_err(dev, "%s: %d: Failed to assert reset\n",
+ __func__, __LINE__);
+ goto err;
+ }
+
+ ret = dwc3_xlnx_rst_assert(priv_data->hibrst);
+ if (ret < 0) {
+ dev_err(dev, "%s: %d: Failed to assert reset\n",
+ __func__, __LINE__);
+ goto err;
+ }
+
+ ret = dwc3_xlnx_rst_assert(priv_data->apbrst);
+ if (ret < 0) {
+ dev_err(dev, "%s: %d: Failed to assert reset\n",
+ __func__, __LINE__);
+ goto err;
+ }
+
+ ret = phy_init(priv_data->usb3_phy);
+ if (ret < 0) {
+ phy_exit(priv_data->usb3_phy);
+ goto err;
+ }
+
+ ret = dwc3_xlnx_rst_deassert(priv_data->apbrst);
+ if (ret < 0) {
+ dev_err(dev, "%s: %d: Failed to release reset\n",
+ __func__, __LINE__);
+ goto err;
+ }
+
+ /* Set PIPE power present signal */
+ writel(PIPE_POWER_ON, priv_data->regs + PIPE_POWER_OFFSET);
+
+ /* Clear PIPE CLK signal */
+ writel(PIPE_CLK_OFF, priv_data->regs + PIPE_CLK_OFFSET);
+
+ ret = dwc3_xlnx_rst_deassert(priv_data->crst);
+ if (ret < 0) {
+ dev_err(dev, "%s: %d: Failed to release reset\n",
+ __func__, __LINE__);
+ goto err;
+ }
+
+ ret = dwc3_xlnx_rst_deassert(priv_data->hibrst);
+ if (ret < 0) {
+ dev_err(dev, "%s: %d: Failed to release reset\n",
+ __func__, __LINE__);
+ goto err;
+ }
+
+ ret = phy_power_on(priv_data->usb3_phy);
+ if (ret < 0) {
+ phy_exit(priv_data->usb3_phy);
+ goto err;
+ }
+
+ /*
+ * This routes the usb dma traffic to go through CCI path instead
+ * of reaching DDR directly. This traffic routing is needed to
+ * make SMMU and CCI work with USB dma.
+ */
+ if (of_dma_is_coherent(dev->of_node) || dev->iommu_group) {
+ reg = readl(priv_data->regs + XLNX_USB_COHERENCY);
+ reg |= XLNX_USB_COHERENCY_ENABLE;
+ writel(reg, priv_data->regs + XLNX_USB_COHERENCY);
+ }
+
+err:
+ return ret;
+}
+
+static int dwc3_xlnx_probe(struct platform_device *pdev)
+{
+ struct dwc3_xlnx *priv_data;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ void __iomem *regs;
+ int ret;
+
+ priv_data = devm_kzalloc(dev, sizeof(*priv_data), GFP_KERNEL);
+ if (!priv_data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "missing memory resource\n");
+ return -ENODEV;
+ }
+
+ regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ /* Store the usb control regs into priv_data for further usage */
+ priv_data->regs = regs;
+
+ priv_data->dev = dev;
+
+ platform_set_drvdata(pdev, priv_data);
+
+ ret = clk_bulk_get_all(priv_data->dev, &priv_data->clks);
+ if (ret < 0)
+ return ret;
+
+ priv_data->num_clocks = ret;
+
+ ret = clk_bulk_prepare_enable(priv_data->num_clocks, priv_data->clks);
+ if (ret)
+ return ret;
+
+ if (of_device_is_compatible(pdev->dev.of_node, "xlnx,zynqmp-dwc3")) {
+ ret = dwc3_xlnx_init_zynqmp(priv_data);
+ if (ret)
+ goto err_clk_put;
+ }
+
+ if (of_device_is_compatible(pdev->dev.of_node, "xlnx,versal-dwc3")) {
+ ret = dwc3_xlnx_init_versal(priv_data);
+ if (ret)
+ goto err_clk_put;
+ }
+
+ ret = of_platform_populate(np, NULL, NULL, dev);
+ if (ret)
+ goto err_clk_put;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_suspend_ignore_children(dev, false);
+ pm_runtime_get_sync(dev);
+
+ pm_runtime_forbid(dev);
+
+ return 0;
+
+err_clk_put:
+ clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
+ clk_bulk_put_all(priv_data->num_clocks, priv_data->clks);
+
+ return ret;
+}
+
+static int dwc3_xlnx_remove(struct platform_device *pdev)
+{
+ struct dwc3_xlnx *priv_data = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+
+ of_platform_depopulate(dev);
+
+ clk_bulk_disable_unprepare(priv_data->num_clocks, priv_data->clks);
+ clk_bulk_put_all(priv_data->num_clocks, priv_data->clks);
+ priv_data->num_clocks = 0;
+
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
+ pm_runtime_set_suspended(dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int dwc3_xlnx_runtime_suspend(struct device *dev)
+{
+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+ clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
+
+ return 0;
+}
+
+static int dwc3_xlnx_runtime_idle(struct device *dev)
+{
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_autosuspend(dev);
+
+ return 0;
+}
+
+static int dwc3_xlnx_runtime_resume(struct device *dev)
+{
+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+ return clk_bulk_enable(priv_data->num_clocks, priv_data->clks);
+}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_xlnx_suspend(struct device *dev)
+{
+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+ /* Disable the clocks */
+ clk_bulk_disable(priv_data->num_clocks, priv_data->clks);
+
+ return 0;
+}
+
+static int dwc3_xlnx_resume(struct device *dev)
+{
+ struct dwc3_xlnx *priv_data = dev_get_drvdata(dev);
+
+ return clk_bulk_enable(priv_data->num_clocks, priv_data->clks);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops dwc3_xlnx_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(dwc3_xlnx_suspend, dwc3_xlnx_resume)
+ SET_RUNTIME_PM_OPS(dwc3_xlnx_runtime_suspend, dwc3_xlnx_runtime_resume,
+ dwc3_xlnx_runtime_idle)
+};
+
+static const struct of_device_id of_dwc3_xlnx_match[] = {
+ { .compatible = "xlnx,zynqmp-dwc3" },
+ { .compatible = "xlnx,versal-dwc3" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_xlnx_match);
+
+static struct platform_driver dwc3_xlnx_driver = {
+ .probe = dwc3_xlnx_probe,
+ .remove = dwc3_xlnx_remove,
+ .driver = {
+ .name = "dwc3-xilinx",
+ .of_match_table = of_dwc3_xlnx_match,
+ .pm = &dwc3_xlnx_dev_pm_ops,
+ },
+};
+
+module_platform_driver(dwc3_xlnx_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Xilinx DWC3 controller specific glue driver");
+MODULE_AUTHOR("Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>");
+MODULE_AUTHOR("Manish Narani <manish.narani@xxxxxxxxxx>");
--
2.17.1
