Two carveout reserved memory nodes have been added for the lone C71x DSP remote processor device present within the MAIN voltage domain for the TI J721E EVM boards. These nodes are assigned to the respective rproc device node as well. The first region will be used as the DMA pool for the rproc device, and the second region will furnish the static carveout regions for the firmware memory. The current carveout addresses and sizes are defined statically for each device. The C71x DSP processor does support a MMU called CMMU, but is not currently supported and as such requires the exact memory used by the firmware to be set-aside. The firmware images currently do not need any RSC_CARVEOUT entries either in their resource tables to allocate the memory for firmware memory segments. The reserved memory nodes can be disabled later on if there is no use-case defined to use the C71x DSP remoteproc processor. Signed-off-by: Suman Anna <s-anna@xxxxxx> --- v2: Rebased version, memory-region property added to existing nodes v1: https://patchwork.kernel.org/patch/11725337/ arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index bb37651a0014..0e28be492ac2 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -49,6 +49,18 @@ c66_1_memory_region: c66-memory@a7100000 { reg = <0x00 0xa7100000 0x00 0xf00000>; no-map; }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; }; }; @@ -204,4 +216,6 @@ &c66_1 { &c71_0 { mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; }; -- 2.28.0
