Re: [PATCH v2 2/2] leds: Add an optional property named 'sdb-gpios'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2020-08-25 6:21, Rob Herring wrote:
On Sat, Aug 08, 2020 at 11:37:31AM +0800, Grant Feng wrote:
The chip enters hardware shutdown when the SDB pin is pulled low.
The chip releases hardware shutdown when the SDB pin is pulled high.

Signed-off-by: Grant Feng <von81@xxxxxxx>
---
  Documentation/devicetree/bindings/leds/leds-is31fl319x.txt | 2 ++
  1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
index fc2603484544..e8bef4be57dc 100644
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
@@ -16,6 +16,7 @@ Optional properties:
  - audio-gain-db : audio gain selection for external analog modulation input.
  	Valid values: 0 - 21, step by 3 (rounded down)
  	Default: 0
+- sdb-gpios : Specifier of the GPIO connected to SDB pin.
We normally use 'shutdown-gpios' for a shutdown GPIO.
Thanks for the review.
Each led is represented as a sub-node of the issi,is31fl319x device.
  There can be less leds subnodes than the chip can support but not more.
@@ -44,6 +45,7 @@ fancy_leds: leds@65 {
  	#address-cells = <1>;
  	#size-cells = <0>;
  	reg = <0x65>;
+	sdb-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
red_aux: led@1 {
  		label = "red:aux";
--
2.17.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux