[PATCH v2 1/2] leds: is31fl319x: Add sdb pin and generate a 5ms low pulse when startup

[Grant Feng <von81@xxxxxxx>]

generate a 5ms low pulse on sdb pin when startup, then the chip
becomes more stable in the complex EM environment.

Signed-off-by: Grant Feng <von81@xxxxxxx>
---
 drivers/leds/leds-is31fl319x.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c
index ca6634b8683c..5c499a5895e0 100644
--- a/drivers/leds/leds-is31fl319x.c
+++ b/drivers/leds/leds-is31fl319x.c
@@ -16,6 +16,8 @@
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 
 /* register numbers */
 #define IS31FL319X_SHUTDOWN		0x00
@@ -61,6 +63,7 @@
 struct is31fl319x_chip {
 	const struct is31fl319x_chipdef *cdef;
 	struct i2c_client               *client;
+	struct gpio_desc		*sdb_gpio;
 	struct regmap                   *regmap;
 	struct mutex                    lock;
 	u32                             audio_gain_db;
@@ -207,6 +210,15 @@ static int is31fl319x_parse_dt(struct device *dev,
 	if (!np)
 		return -ENODEV;
 
+	is31->sdb_gpio = devm_gpiod_get_optional(dev,
+						"sdb",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(is31->sdb_gpio)) {
+		ret = PTR_ERR(is31->sdb_gpio);
+		dev_err(dev, "Failed to get sdb gpio: %d\n", ret);
+		return ret;
+	}
+
 	of_dev_id = of_match_device(of_is31fl319x_match, dev);
 	if (!of_dev_id) {
 		dev_err(dev, "Failed to match device with supported chips\n");
@@ -350,6 +362,12 @@ static int is31fl319x_probe(struct i2c_client *client,
 	if (err)
 		goto free_mutex;
 
+	if (is31->sdb_gpio) {
+		gpiod_direction_output(is31->sdb_gpio, 0);
+		mdelay(5);
+		gpiod_direction_output(is31->sdb_gpio, 1);
+	}
+
 	is31->client = client;
 	is31->regmap = devm_regmap_init_i2c(client, &regmap_config);
 	if (IS_ERR(is31->regmap)) {
-- 
2.17.1