Dne ponedeljek, 24. avgust 2020 ob 22:54:01 CEST je Pablo Sebastián Greco napisal(a): > On 24/8/20 16:36, Jernej Skrabec wrote: > > DCDC1 regulator powers many different subsystems. While some of them can > > work at 3.0 V, some of them can not. For example, VCC-HDMI can only work > > between 3.24 V and 3.36 V. According to OS images provided by the board > > manufacturer this regulator should be set to 3.3 V. > > > > Set DCDC1 and DCDC1SW to 3.3 V in order to fix this. > > > > Fixes: da7ac948fa93 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 > > > > Ultra") > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> > > --- > > > > arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 10 +++++----- > > 1 file changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > > b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index > > 42d62d1ba1dc..ea15073f0c79 100644 > > --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > > +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts > > @@ -223,16 +223,16 @@ ®_aldo3 { > > > > }; > > > > ®_dc1sw { > > > > - regulator-min-microvolt = <3000000>; > > - regulator-max-microvolt = <3000000>; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > > > regulator-name = "vcc-gmac-phy"; > > > > }; > > > > ®_dcdc1 { > > > > regulator-always-on; > > > > - regulator-min-microvolt = <3000000>; > > - regulator-max-microvolt = <3000000>; > > - regulator-name = "vcc-3v0"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vcc-3v3"; > > > > }; > > > > ®_dcdc2 { > > Should this be done also for the bananapi-m2-berry?, it is basically the > same device > sun8i-v40-bananapi-m2-berry.dts I think so but I would rather not do that without testing and I don't have that board. Best regards, Jernej