Add "fsl,imx8mp-usb-phy" compatible string for imx8mp usb phy, which is similar with imx8mq usb phy but with some different customizations. Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Li Jun <jun.li@xxxxxxx> --- no changes. Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt index ed47e5c..7c70f2a 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -1,7 +1,7 @@ * Freescale i.MX8MQ USB3 PHY binding Required properties: -- compatible: Should be "fsl,imx8mq-usb-phy" +- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy" - #phys-cells: must be 0 (see phy-bindings.txt in this directory) - reg: The base address and length of the registers - clocks: phandles to the clocks for each clock listed in clock-names -- 2.7.4
