Hi Kurt,
On Thu, Aug 20, 2020 at 10:11:15AM +0200, Kurt Kanzenbach wrote:
> The switch has support for the 802.1Qbv Time Aware Shaper (TAS). Traffic
> schedules may be configured individually on each front port. Each port has eight
> egress queues. The traffic is mapped to a traffic class respectively via the PCP
> field of a VLAN tagged frame.
>
> The TAPRIO Qdisc already implements that. Therefore, this interface can simply
> be reused. Add .port_setup_tc() accordingly.
>
> The activation of a schedule on a port is split into two parts:
>
> * Programming the necessary gate control list (GCL)
> * Setup hrtimer for starting the schedule
>
> The hardware supports starting a schedule up to eight seconds in the future. The
> TAPRIO interface provides an absolute base time. Therefore, hrtimers are
> leveraged.
>
> Signed-off-by: Kurt Kanzenbach <kurt@xxxxxxxxxxxxx>
> ---
> drivers/net/dsa/hirschmann/hellcreek.c | 294 +++++++++++++++++++++++++
> drivers/net/dsa/hirschmann/hellcreek.h | 21 ++
> 2 files changed, 315 insertions(+)
>
> diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
> index 745ca60342b4..e5b54f42c635 100644
> --- a/drivers/net/dsa/hirschmann/hellcreek.c
> +++ b/drivers/net/dsa/hirschmann/hellcreek.c
> @@ -22,7 +22,9 @@
> #include <linux/spinlock.h>
> #include <linux/delay.h>
> #include <linux/ktime.h>
> +#include <linux/time.h>
> #include <net/dsa.h>
> +#include <net/pkt_sched.h>
>
> #include "hellcreek.h"
> #include "hellcreek_ptp.h"
> @@ -153,6 +155,15 @@ static void hellcreek_select_vlan(struct hellcreek *hellcreek, int vid,
> hellcreek_write(hellcreek, val, HR_VIDCFG);
> }
>
> +static void hellcreek_select_tgd(struct hellcreek *hellcreek, int port)
> +{
> + u16 val = 0;
> +
> + val |= port << TR_TGDSEL_TDGSEL_SHIFT;
> +
> + hellcreek_write(hellcreek, val, TR_TGDSEL);
> +}
> +
> static int hellcreek_wait_until_ready(struct hellcreek *hellcreek)
> {
> u16 val;
> @@ -958,6 +969,24 @@ static void __hellcreek_setup_tc_identity_mapping(struct hellcreek *hellcreek)
> }
> }
>
> +static void hellcreek_setup_tc_mapping(struct hellcreek *hellcreek,
> + struct net_device *netdev)
> +{
> + int i, j;
> +
> + /* Setup mapping between traffic classes and port queues. */
> + for (i = 0; i < netdev_get_num_tc(netdev); ++i) {
> + for (j = 0; j < netdev->tc_to_txq[i].count; ++j) {
> + const int queue = j + netdev->tc_to_txq[i].offset;
> +
> + hellcreek_select_prio(hellcreek, i);
> + hellcreek_write(hellcreek,
> + queue << HR_PRTCCFG_PCP_TC_MAP_SHIFT,
> + HR_PRTCCFG);
> + }
> + }
> +}
What other driver have you seen that does this?
> +
> +static int hellcreek_port_set_schedule(struct dsa_switch *ds, int port,
> + const struct tc_taprio_qopt_offload *taprio)
> +{
> + struct net_device *netdev = dsa_to_port(ds, port)->slave;
> + struct hellcreek *hellcreek = ds->priv;
> + struct hellcreek_port *hellcreek_port;
> + struct hellcreek_schedule *schedule;
> + unsigned long flags;
> + ktime_t start;
> + u16 ctrl;
> +
> + hellcreek_port = &hellcreek->ports[port];
> +
> + /* Convert taprio data to hellcreek schedule */
> + schedule = hellcreek_taprio_to_schedule(taprio);
> + if (IS_ERR(schedule))
> + return PTR_ERR(schedule);
> +
> + dev_dbg(hellcreek->dev, "Configure traffic schedule on port %d\n",
> + port);
> +
> + /* Cancel an in flight timer */
> + hrtimer_cancel(&hellcreek_port->cycle_start_timer);
> +
> + spin_lock_irqsave(&hellcreek->reg_lock, flags);
> +
> + if (hellcreek_port->current_schedule) {
> + kfree(hellcreek_port->current_schedule->entries);
> + kfree(hellcreek_port->current_schedule);
> + }
> +
> + hellcreek_port->current_schedule = schedule;
> +
> + /* First select port */
> + hellcreek_select_tgd(hellcreek, port);
> +
> + /* Setup traffic class <-> queue mapping */
> + hellcreek_setup_tc_mapping(hellcreek, netdev);
> +
> + /* Enable gating and set the admin state to forward everything in the
> + * mean time
> + */
> + ctrl = (0xff << TR_TGDCTRL_ADMINGATESTATES_SHIFT) | TR_TGDCTRL_GATE_EN;
> + hellcreek_write(hellcreek, ctrl, TR_TGDCTRL);
> +
> + /* Cancel pending schedule */
> + hellcreek_write(hellcreek, 0x00, TR_ESTCMD);
> +
> + /* Setup a new schedule */
> + hellcreek_setup_gcl(hellcreek, port, schedule);
> +
> + /* Configure cycle time */
> + hellcreek_set_cycle_time(hellcreek, schedule);
> +
> + /* Setup timer for schedule switch: The IP core only allows to set a
> + * cycle start timer 8 seconds in the future. This is why we setup the
> + * hritmer to base_time - 5 seconds. Then, we have enough time to
> + * activate IP core's EST timer.
> + */
> + start = ktime_sub_ns(schedule->base_time, (u64)5 * NSEC_PER_SEC);
> + hrtimer_start_range_ns(&hellcreek_port->cycle_start_timer, start,
> + NSEC_PER_SEC, HRTIMER_MODE_ABS);
> +
> + spin_unlock_irqrestore(&hellcreek->reg_lock, flags);
> +
> + return 0;
> +}
Thanks,
-Vladimir
