Hi, this series adds a DSA driver for the Hirschmann Hellcreek TSN switch IP. Characteristics of that IP: * Full duplex Ethernet interface at 100/1000 Mbps on three ports * IEEE 802.1Q-compliant Ethernet Switch * IEEE 802.1Qbv Time-Aware scheduling support * IEEE 1588 and IEEE 802.1AS support That IP is used e.g. in https://www.arrow.com/en/campaigns/arrow-kairos Due to the hardware setup the switch driver is implemented using DSA. A special tagging protocol is leveraged. Furthermore, this driver supports PTP, hardware timestamping and TAPRIO offloading. This work is part of the AccessTSN project: https://www.accesstsn.com/ The previous versions can be found here: * https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@xxxxxxxxxxxxx/ * https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@xxxxxxxxxxxxx/ * https://lkml.kernel.org/netdev/20200723081714.16005-1-kurt@xxxxxxxxxxxxx/ Changes since v2: * Make it compile by getting all requirements merged first (Jakub Kicinski, David Miller) * Use "tsn" for TSN register set (Rob Herring) * Fix DT binding issues (Rob Herring) Changes since v1: * Code simplifications (Florian Fainelli, Vladimir Oltean) * Fix issues with hellcreek.yaml bindings (Florian Fainelli) * Clear reserved field in ptp v2 event messages (Richard Cochran) * Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean) * Fix Kconfig (Florian Fainelli) * Add tags (Florian Fainelli, Rob Herring, Richard Cochran) Changes since RFC ordered by reviewers: * Andrew Lunn * Use dev_dbg for debug messages * Get rid of __ function names where possible * Use reverse xmas tree variable ordering * Remove redundant/useless checks * Improve comments e.g. for PTP * Fix Kconfig ordering * Make LED handling more generic and provide info via DT * Setup advertisement of PHYs according to hardware * Drop debugfs patch * Jakub Kicinski * Fix compiler warnings * Florian Fainelli * Switch to YAML DT bindings * Richard Cochran * Fix typo * Add missing NULL checks Kamil Alkhouri (2): net: dsa: hellcreek: Add PTP clock support net: dsa: hellcreek: Add support for hardware timestamping Kurt Kanzenbach (6): net: dsa: Add tag handling for Hirschmann Hellcreek switches net: dsa: Add DSA driver for Hirschmann Hellcreek switches net: dsa: hellcreek: Add TAPRIO offloading support net: dsa: hellcreek: Add PTP status LEDs dt-bindings: Add vendor prefix for Hirschmann dt-bindings: net: dsa: Add documentation for Hellcreek switches .../bindings/net/dsa/hellcreek.yaml | 125 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/net/dsa/Kconfig | 2 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/hirschmann/Kconfig | 9 + drivers/net/dsa/hirschmann/Makefile | 5 + drivers/net/dsa/hirschmann/hellcreek.c | 1551 +++++++++++++++++ drivers/net/dsa/hirschmann/hellcreek.h | 301 ++++ .../net/dsa/hirschmann/hellcreek_hwtstamp.c | 479 +++++ .../net/dsa/hirschmann/hellcreek_hwtstamp.h | 58 + drivers/net/dsa/hirschmann/hellcreek_ptp.c | 452 +++++ drivers/net/dsa/hirschmann/hellcreek_ptp.h | 76 + include/net/dsa.h | 2 + net/dsa/Kconfig | 6 + net/dsa/Makefile | 1 + net/dsa/tag_hellcreek.c | 101 ++ 16 files changed, 3171 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.yaml create mode 100644 drivers/net/dsa/hirschmann/Kconfig create mode 100644 drivers/net/dsa/hirschmann/Makefile create mode 100644 drivers/net/dsa/hirschmann/hellcreek.c create mode 100644 drivers/net/dsa/hirschmann/hellcreek.h create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.c create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.h create mode 100644 net/dsa/tag_hellcreek.c -- 2.20.1
