Hi Geert,
Thank you for the review.
On Fri, Aug 21, 2020 at 2:33 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Sun, Aug 16, 2020 at 9:33 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > Add support for the SPI NOR device used to boot up the system
> > to the System on Module DT.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
> > +++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
>
> > @@ -70,4 +80,28 @@
> > groups = "mmc1_data4", "mmc1_ctrl";
> > function = "mmc1";
> > };
> > +
> > + qspi_pins: qspi {
> > + groups = "qspi_ctrl", "qspi_data2";
> > + function = "qspi";
> > + };
> > +};
> > +
> > +&qspi {
> > + pinctrl-0 = <&qspi_pins>;
> > + pinctrl-names = "default";
> > +
> > + status = "okay";
> > +
> > + /* WARNING - This device contains the bootloader. Handle with care. */
> > + flash: flash@0 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
>
> #{address,size}-cells are not needed, unless you list legacy partitions
> (i.e. partitions not contained in a "partitions" container).
>
Agreed will drop it.
> > + compatible = "sst,sst25vf016b", "jedec,spi-nor";
> > + reg = <0>;
> > + spi-max-frequency = <50000000>;
> > + m25p,fast-read;
> > + spi-cpol;
> > + spi-cpha;
>
> Perhaps you want to add the partition layout, too?
>
will do.
> > + };
> > };
>
> With the above fixed/clarified:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
Thank you. I shall post this lone patch fixing the above.
Cheers,
Prabhakar
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
